Anoto Korea Corp. PGD-601 Manual Do Utilizador

■

Download the PenHub Software on the website(www.pengenerations.com)

■

In case of using the EZ dongle

■

In case of using the embedded Bluetooth of PC or using the common Bluetooth dongle

■

 Using the pen for the first time

  - Some PC doesn’t support to connect Bluetooth pairing with pen directly. Please use the common 

     Bluetooth dongle or EZ dongle or the common Bluetooth dongle at this time.
  - Please disable or delete the embedded Bluetooth hardware in the PC when common Bluetooth 
    dongle conflict with the PC’s

ADP-601 can be easily connected with PC by tapping the pen tip on

 the note or anything after Bluetooth registering.

( The top GREEN LED keeps turning on when ADP-601 is connected

  to PC successfully.)

Control Panel

Tap

Hardware & Sound

Hardware & Sound

Add Bluetooth device

Select ADP-601RS

Input the PIN code as “0000”

Attach the EZ dongle

to the USB port.

Check the LED of EZ 

dongle whether it is

blinking or not.

Turn on the 

ADP-601 pen.

Check the LED of 

EZ dongle and ADP-601 

whether they keep

turning on.

   - It takes longer time in WinXP than other OS because the .NET framework is also installed.

■

Re-registration for using EZ dongle

7.0mm

2.0mm

   - If user fail to do Bluetooth pairing repeatedly or try to use another ADP-601, please refer the 

      step in below;

       A. Attach the EZ dongle to USB port of PC

       B. Press the “RESET SWITCH” on the EZ dongle with a sharp things 

           such as pin. Then, the LED on EZ dongle start to blink quickly.

       C. Turn on the ADP-601.

Specification

- Please keep this user’s guide in an easily accessible place and read through the complete

  document before the dongle is used.

- Dongle only supports ADP-601 digital pen and has no memory inside. 

- Do not open or disassemble the dongle, take special care not to damage.

- Do not drop the dongle or allow any other kind of strong impact.

- Consult your point of purchase if the dongle needs repair. 

- Dongle may cause a choking hazard. 

- Do not expose the dongle to water or any other fluids. It is not waterproof or water resistant. 

  Do not leave it in damp conditions.

- Do not expose the dongle to extreme temperatures or direct sunlight. 

- The dongle is intended for indoor usage. 

- Clean with a dry cloth. Do not use water, soap, detergent or other chemicals which may deform 

  the dongle.

Notice

Homepage : www.pengenerations.com / E-mail : help@pengenerations.com / CS Center : +82 . 31. 600 . 0840