SANYO Electric Co. Ltd. PBS-CS47 Manual Do Utilizador

11

1) Reeve the cable from the dome nut into

the lid.

2) Pull the line cable out to enough length

that the tip of the cable can be
processed.

3) Peeling of the line cable covering.
     (Photo 6)

\

Peel off the covering of the line cable. The
length of the line cable is 100 - 120 mm.
(Photo 6)

4) Loosen the shield and wind it on the

heart line of covering 4 turns or more.
(Photo 7)

\

Loosen these four pair lines, plug in the
designated touching sockets.

Shield tape

Drain wire

Covering

100 - 120mm

Wind the aluminum shield, and

furthermore wind drain wire here too.

Process the end of the line wire, which are

not used, with the suiting tape.