ICOM 269800 Manual Do Utilizador

67

12

OTHER FUNCTIONS

■ Microphone keys

The supplied HM-133V’s (optional for some versions) [F-1]
and [F-2] keys memorize the transceiver conditions. 
The [UP]/[DN] keys of the standard or an optional micro-
phone (other than the HM-133V) can be assigned functions
like the function keys on the transceiver’s front panel.

D

D [F-1]/[F-2] keys on HM-133V

The following conditions can be memorized into [F-1] and 
[F-2] keys, independently.

• Operating frequency
• Repeater setting 

(offset direction and frequency, tone

ON/OFF and frequency)

• Tone/DTCS squelch 

(ON/OFF, frequency/code and polarity)

• Transmit output power selection
• Set mode settings
• Initial set mode settings 

(except display type item)

➥ Programming the condition

Set the desired contents of each condition,
then push [F-1]/[F-2] for 1 sec.

• 3 beeps sound.

➥ Re-calling the condition

Push [F-1]/[F-2] momentarily.

D

D [UP]/[DN] keys on a microphones

(other than HM-133V)

The following functions are assigned to the [UP]/[DN] keys
on the other microphones (HM-118N/TAN, etc.) when first ap-
plying power.

[UP] : channel up; push and hold to start scan, push again

to stop scan.

[DN] : channel down; push and hold to start scan, push

again to stop scan.

➥ Assigning a function
q Turn the power OFF.
w While pushing the desired key on the transceiver and one

of either [UP]/[DN] keys on the microphone, turn the
power ON.

• The function is programmed into the key.

➥ Clearing an assignment
q Turn the power OFF.
w While pushing the desired [UP] or [DN] key on the micro-

phone, turn the power ON.

[F-1]/[F-2]