ICOM 280402 Manual Do Utilizador
17
3
BASIC OPERATION
■ User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “cus-
tomize” the transceiver operation to suit your preferences and
operating style.
set seldom-changed settings. In this case you can “cus-
tomize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q While pushing and holding [P1]
q While pushing and holding [P1]
and [P2], rotate [VOL] to turn
the power ON. Then, push and
hold [P0] to enter user set
mode.
the power ON. Then, push and
hold [P0] to enter user set
mode.
w Push [P0] several times to
select the appropriate item.
Then, push [Up] or [Down] to
set the desired level/condition.
Then, push [Up] or [Down] to
set the desired level/condition.
• Available set mode functions are
Backlight, LCD Contrast, Beep,
Beep Level, SQL Level, AF Min
Level, Mic Gain, Vox Gain, Vox
Delay and Battery Voltage.
Beep Level, SQL Level, AF Min
Level, Mic Gain, Vox Gain, Vox
Delay and Battery Voltage.
e Rotate [VOL] to turn the power
OFF to exit set mode.
User set mode is also available via
a programmable key. Please refer
to p. 10 [User Set Mode] section.
a programmable key. Please refer
to p. 10 [User Set Mode] section.
[P0]
[P1]/[P2]
[VOL]
[P0]
[Down]
[Up]
[VOL]
3
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 17 (1,1)