ICOM 297000 Manual Do Utilizador

47

5

MEMORY OPERATION

Contents of programmed memory banks can be cleared or
transferred to another bank.

INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.

q Select the desired bank contents to be transferred or

erased from the band 

(left or right)

.

➥ Push the desired band’s [M/CALL•MW] several times

to select memory mode.

➥ Push and hold the same band’s  [MAIN•BAND] for

1 sec. then rotate the same band’s [DIAL] to select the
desired memory bank.

➥ Push the [MAIN•BAND] to select the bank then rotate

the [DIAL] to select the desired bank channel.

• Bank initial and bank channel stops blinking.

w Push and hold the same band’s [M/CALL•MW] for 1 sec.

• “X” indicator and the memory channel number blink

e Push [SEL](V/MHz•SCAN)

(Left band’s)

several times to se-

lect bank, then push [EDIT](M/CALL•MW)

(Right band’s)

.

r Rotate [DIAL] to select the desired bank initial 

(A to Z)

to

transfer.

• Select no indication, “– – – –,” when erasing the contents from

the bank.

t Push [>](M/CALL•MW)

(Left band’s)

then rotate the same

band’s [DIAL] to select a bank channel, if desired.

y Push [BACK](V/MHz•SCAN)

(Right band’s)

to back the se-

lect memory write mode.

u Push and hold [S.MW](M/CALL•MW)

(Left band’s)

for 1 sec.

to be transferred or erased.

i Repeat steps q to t for transferring or erasing an another

banks contents.

■ Erasing/transferring bank contents