ICOM 301500 Manual Do Utilizador
42
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N Operating AM
q Push and hold
F-INP ENT
BAND
for 1 sec., then push a
band key to select the desired band.
w Push
MODE
to select AM mode.
e Rotate [DIAL] to tune in a desired signal.
•
The S-meter indicates received signal strength when a
signal is received.
signal is received.
•
The default tuning step for AM mode is 1 kHz; this
can be changed using the tuning step program mode.
(p. 26)
can be changed using the tuning step program mode.
(p. 26)
r Rotate the [AF] control to set audio to a comfort-
able listening level.
t Push [PTT] (microphone) to transmit.
•
“
” appears.
y Speak into the microphone at your normal voice
level.
•
Adjust ‘MIC Gain’ at this step, if necessary. (p. 71)
u Release [PTT] (microphone) to return to receive.
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
[DIAL]
[AF]
Appears while transmitting.
F-INP ENT
BAND
Band keys
“AM” appears.
D Convenient functions for receive
• Preamp and attenuator (p. 45)
± Push
± Push
P.AMP
ATT
to turn the preamp ON or OFF.
•
“
” appears when the preamp is set to ON.
± Push and hold
P.AMP
ATT
for 1 sec. to turn the attenu-
ator ON.
•
Push
P.AMP
ATT
to turn the attenuator OFF.
•
“
” appears when the attenuator is set to ON.
• AGC (auto gain control) (p. 45)
± Push
± Push
AGC
once or twice to select the time con-
stant for the AGC circuit fast and slow.
•
“F.AGC” appears when the fast time constant is se-
lected, and no indicator appears when the slow time
constant is selected, respectively.
lected, and no indicator appears when the slow time
constant is selected, respectively.
± Push and hold
AGC
for 1 sec. to turn the AGC
function OFF.
•
“AGC-OFF” appears on the display.
• Noise blanker (p. 49)
± Push
± Push
NB
to turn the noise blanker ON or OFF.
•
“
” appears when the noise blanker is set to ON.
± Push and hold
NB
for 1 sec. to enter the noise
blanker set mode, then rotate [DIAL] to adjust the
threshold level, or the blank time.
threshold level, or the blank time.
•
Rotate
[M-CH] to select an item.
• Twin PBT (passband tuning) (p. 46)
±
±
• Noise reduction (p. 50)
± Push
± Push
NR
to turn the noise reduction ON or OFF.
•
“
” appears when the noise reduction is ON.
± Push and hold
NR
for 1 sec. to enter the noise
reduction level set mode, then rotate [DIAL] to
adjust the noise reduction level.
adjust the noise reduction level.
• Manual notch filter (pgs. 51, 52)
± Push
± Push
MNF
to turn the manual notch filter ON or
OFF.
•
“
” appears when the manual notch filter is set to
ON.
± Push and hold
MNF
for 1 sec. to enter the man-
ual notch filter set mode, then rotate [DIAL] to se-
lect the filter width from narrow, middle and wide.
lect the filter width from narrow, middle and wide.
• Auto notch filter (p. 51)
± Push
± Push
ANF
METER
to turn the auto notch filter ON or
OFF.
•
“
” appears when the auto notch filter is set to
ON.
D Convenient functions for transmit
• VOX (voice operated transmit) (p. 53)
± Push
± Push
VOX
to turn the VOX function ON or OFF.
•
“
” appears when the VOX function is ON.
± Push and hold
VOX
for 1 sec. to enter the VOX
set mode, then rotate [DIAL] to adjust the VOX
gain, anti VOX gain or VOX delay.
gain, anti VOX gain or VOX delay.
•
Rotate
[M-CH] to select an item.