ICOM 318002 Manual Do Utilizador
11
2
BASIC OPERATION
2
■
User set mode
User set mode can be accessed with ‘Power ON’ function. In
this case, all set mode items are available.
User set mode allows you to set seldom-changed settings
and you can “customize” the transceiver operation to suit
your preferences and operating style.
this case, all set mode items are available.
User set mode allows you to set seldom-changed settings
and you can “customize” the transceiver operation to suit
your preferences and operating style.
Entering the user set mode:
q
q
While pushing and holding [P1] and [P2], push
[ ] to turn
the power ON.
• Turn power OFF in advance.
• Push and hold [P1] and [P2] continuously until “SET MODE”
• Push and hold [P1] and [P2] continuously until “SET MODE”
appears on the display.
[P1] [P2]
[ ]
w
Push and hold [P0] for 1 sec. to enter user set mode.
[P0]
e
Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] to set the desired level/condi-
tion.
tion.
• Available set mode functions are
Backlight, Beep, Beep Level,
SQL Level, AF Min Level, Mic Gain, Horn, Battery Voltage,
Signal Moni and Lone Worker.
Signal Moni and Lone Worker.
[P0]
[Up]/[Down]
r
Push and hold
[ ] for 1 sec. to turn power OFF, then ON
again to exit set mode.
[ ]
User set mode is also available using a programmable key.
Please refer to p. 6 [User Set Mode]
Please refer to p. 6 [User Set Mode]
section for instructions
regarding using the key assigned for user set mode.
[User Set Mode] is allowed for the quick item selection. Set
“Enable” for the often used items with the CS-F3020/F5020
[User Set Mode] is allowed for the quick item selection. Set
“Enable” for the often used items with the CS-F3020/F5020
cloning
software
.