ICOM 325000 Manual Do Utilizador

11

3

FREQUENCY AND CHANNEL SETTING 

N Setting a frequency

qPush [V/M] to select the VFO mode, if necessary.

wSelect a desired frequency band with [BAND].

• Or, while holding down [BAND], rotate the [DIAL] to select a 

desired frequency band.

eRotate [DIAL] to select a desired frequency band.

• The frequency changes according to the preset tuning steps. 

See the section to the right for setting the tuning step.

• While holding down [FUNC], rotate [DIAL] to change the fre-

quency in 1 MHz steps (default).

[DIAL]

[DIAL]

changes

the

frequency according to
the selected tuning step.

While continuing to push
[FUNC], [DIAL] changes
the frequency in 1 MHz
steps (default).

The 1 MHz tuning step (dial select step) can be set to 100 
kHz, 1 MHz or 10 MHz tuning steps in the Set mode. See 
p. 15 for details.

N Setting a tuning step

The tuning step can be selected for each frequency band. 
However, additional steps become selectable only in the

additional steps become selectable only in the 

VHF Air band (8.33 kHz) and in the AM broadcast band (9 
kHz)*. The following tuning steps are available for the IC-R6.

The following tuning steps are available for the IC-R6.

• 5.0 kHz

• 6.25 kHz

• 8.33 kHz*

• 9.0 kHz*

• 10.0 kHz

• 12.5 kHz

• 15.0 kHz

• 20.0 kHz

• 25.0 kHz

• 30.0 kHz

• 50.0 kHz

• 100.0 kHz

D Tuning step selection

qPush [V/M] to select the VFO mode, if necessary.

wPush [BAND] to select a desired frequency band.

• Or, while holding down [BAND], rotate [DIAL] to select a 

desired frequency band.

ePush [TS] to enter tuning step selecting condition.

rRotate [DIAL] to select a desired tuning step.

tPush [TS] to return to the VFO mode.

[DIAL]

5 kHz tuning step