ICOM 325300 Manual Do Utilizador

5

2

PANEL DESCRIPTION

D Keypad (continued)

± During VFO mode operation, push to select an 

operating frequency band. (p. 19)

± Push and hold to open the squelch temporarily 

and monitor the operating frequency. (p. 17)

± While continuing to push this key, rotate [DIAL] to 

adjust the squelch level. (p. 17)

± During memory mode operation, push to enter the 

memory bank group selection. (p. 33)

± Push to select the output power. (p. 22)

• Selects the transmit output power from high, mid or 

low.

± Push and hold for 1 sec. to enter the scan type 

selection mode. (pp. 42, 44, 45)

• Push again to start the scan.

± Push to enter the Set mode.  (p. 51)
± Push and hold for 1 sec. to toggle the lock func-

tion ON or OFF. (p. 21)

± During select memory write mode, push to select 

the items. (pp. 32, 34, 38, 39)

± Push and hold for 1 sec. to start tone scan func-

tion. (p. 71)

± Push and hold for 1 sec. to select repeater tone, 

tone squelch, tone squelch reverse, DTCS 
squelch, DTCS squelch reverse and no tone op-
eration in sequence. (p. 70)

• Pocket beep function is available for tone squelch and 

DTCS squelch. (p. 70)

1

± Push and hold for 1 sec. to select minus duplex, 

plus duplex or simplex operation. (p. 26)

• “DUP–” (minus duplex), “DUP” (plus duplex) and no 

indication (simplex) appear in order.