ICOM 333201 Manual Do Utilizador
16
3
CONNECTION AND MAINTENANCE
■
Antenna
A key element in the performance of any communication sys-
tems is an antenna. Contact your dealer for more information
regarding antennas and how to install them.
tems is an antenna. Contact your dealer for more information
regarding antennas and how to install them.
■
Fuse replacement
A fuse is installed in each fuse holder of the supplied DC
power cable*. If a fuse blows or the transceiver stops func-
tioning, track down the source of the problem if possible, and
then replace the damaged fuse with a new rated one.
power cable*. If a fuse blows or the transceiver stops func-
tioning, track down the source of the problem if possible, and
then replace the damaged fuse with a new rated one.
*Depending on version, only 1 fuse holder may be attached.
❑
❑
Fuse rating: 10 A (for 1 fuse holder)/20 A (for 2 fuse holders)
USE the applicable fuse only.
■
Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
soft, dry cloth.
AVOID the use of solvents such as benzene or
alcohol, as they may damage the transceiver sur-
faces.
alcohol, as they may damage the transceiver sur-
faces.
■
Options
• O.C-1132A/O.C-347
dc
power
cable
2 fuse holders are attached.
USE the 20 A fuse only.
OPC-1132A: 3 m (9.8 ft)
OPC-347: 7 m (23 ft)
OPC-347: 7 m (23 ft)
• O.C-1939/O.C-2078
acc
cable
Allows you to connect to an external terminal.
OPC-1939: D-sub 15-pin, OPC-2078: D-sub 25-pin
OPC-1939: D-sub 15-pin, OPC-2078: D-sub 25-pin
•
HM-152/HM-152T/HM-148G
hand
microphone
HM-152 : Hand microphone
HM-152T : DTMF microphone
HM-148G : Self ground heavy duty microphone
HM-152T : DTMF microphone
HM-148G : Self ground heavy duty microphone
•
SM-26
desktop
microphone
•
S.-22/S.-30
external
speaker
Input impedance
: 4 ø
SP-22 : Rated input; 5 W, Max. input; 7 W
SP-30 : Rated input; 20 W, Max. input; 30 W
SP-30 : Rated input; 20 W, Max. input; 30 W