ICOM 333202 Manual Do Utilizador

3

1

PANEL DESCRIPTION

■

The following functions can be assigned to [UP], [DOWN], 
[P0], [P1], [P2] and [P3] programmable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.

CH UP AND DOWN KEYS 
As  described  in  the  following  topics,  after  pushing  a  pro-
grammed key, push [CH Up] or [CH Down] to select an op-
tion, setting, etc.

ZONE KEY
Push this key, then select the desired zone using [CH Up]/
[CH Down].

  

What is “zone”?— Certain channels are grouped together 
and assigned to a zone, according to their intended to use. 
For example, ‘Staff A’ and ‘Staff B’ are assigned to a “Busi-
ness” zone, and ‘John’ and ‘Cindy’ are assigned to a “Pri-
vate” zone.

SCAN START/STOPKEY
➥

Push to start and cancel scanning operation.

 • When a scan is started with the Power ON Scan or Automatic

scan function, push this key to cancel it. The cancelled scan 
resumes after the pre-programmed time period. 

➥

Hold down this key for 1 second to display the scan group, 
then push [CH Up] or [CH Down] to select the desired 
one.

SCAN ADD/DEL (TAG) KEY
➥

 Push to add the channel to, or delete it from, the current 
scan group.

  1.  Push  to  display  the  scan  group,  then  push  [CH  Up]  or 

[CH Down] to select the desired one.

  2.  Push to add the channel to, or delete it from, the selected scan 

group.

 3. Hold down for 1 second to exit the scan list selection mode.

➥

 While a scan is paused on a non-priority channel, push this 
key to delete the selected channel from the scan group.

 

  Depending on the setting, the cleared channel is added 

to the scan group again after the scan is cancelled.