ICOM 333502 Manual Do Utilizador

ii

PRECAUTIONS

R WARNING! NEVER

 connect the transceiver to an 

AC outlet. This may pose a fire hazard or result in an electric 
shock.

R WARNING! NEVER

 connect the transceiver to a 

power source of more than 16 V DC or use reverse polarity. 
This could cause a fire or damage the transceiver.

R WARNING! NEVER

 cut the DC power cable be-

tween the DC plug and fuse holder. If an incorrect connection 
is made after cutting, the transceiver might be damaged.

R WARNING! NEVER

 place the transceiver where 

normal operation of the vehicle may be hindered or where it 
could cause bodily injury.

 

 allow children to touch the trans-

ceiver.

 

snow or any liquids.

 the specified microphone only. Other microphones 

have different pin assignments and may damage the trans-
ceiver.

 use or place the transceiver in areas with tem-

peratures below –30°C (–22°F) or above +60°C (+140°F), or 
in areas subject to direct sunlight, such as the dashboard.

 operate the transceiver without running the ve-

hicle’s engine. The vehicle’s battery will quickly run out when 
the transceiver transmits while the vehicle’s engine is OFF.

ronments.

 place the transceiver against walls. This will ob-

struct heat dissipation.

 use harsh solvents such as benzine or alcohol 

when cleaning, as they will damage the transceiver sur-
faces.

 The transceiver will become hot when 

operating continuously for long periods of time.

Approved Icom optional equipment is designed for optimal 
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an 
Icom transceiver in the event the Icom transceiver is used with 
equipment that is not manufactured or approved by Icom.