ICOM 339000 Manual Do Utilizador
43
GPS OPERATION
11
The ID-51A/E has a built-in internal GPS receiver. You can
checkyourcurrentposition,ortransmitGPSdataintheDV
mode.
checkyourcurrentposition,ortransmitGPSdataintheDV
mode.
q Push [MENU]
to enter
the Menu screen.
Push D-pad(
Push D-pad(
w
) to select the
root item (GPS), and then
push D-pad(Ent) to go to the
next level.
push D-pad(Ent) to go to the
next level.
D-pad
(�)
(Ent)
( MENU > GPS > GPS Set>
GPS Select)
Refer to the menu sequence
e
shown directly above and
push D-pad() to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
push D-pad() to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
Push D-pad(
r
) to select “In-
ternal GPS.”
t Push [MENU]
to exit the
Menu screen.
•The GPS icon blinks when re-
ceiving data, as illustrated be-
low, and stops blinking when
valid data is received.
low, and stops blinking when
valid data is received.
➝
➝
➝
- If “Manual” was selected, the
icon does not appear.
•It may take only a few seconds
to receive, but depending on the
environment, it may take a few
minutes. If you have difficulties
receiving, we recommend that
you try a different location.
environment, it may take a few
minutes. If you have difficulties
receiving, we recommend that
you try a different location.
See the PDF type Advanced Instruction for more details of
the GPS operation.
the GPS operation.
STEP 1
Receiving GPS data from the internal
GPS receiver
GPS receiver
Go to step r
GPS Select screen
Blinks