ICOM 340100 Manual Do Utilizador

6

2

PANEL DESCRIPTION

y 

    Appears or blinks when a matched signal is received, de-

pending on the presetting.

u 

    Appears when the call code memory is selected.

i 

    Appears or blinks when the battery power decreases to a 

specified level.

Indication

Full

Mid

Charging

required

Exhausted

Battery

Battery level

blinks when the battery is exhausted.

blinks when the battery is over charged.

o 

➥

  Displays the operating channel number, channel name, 

Set mode contents, DTMF code, and so on.

  ➥  The display mode can be set to one line or two lines. 

Ask your dealer for details.

 

•  In this instruction manual, the LCD illustration is described 

using the two-line display mode.

!0 

    Indicates the programmed function of the front panel keys 

([P0], [P1], [P2] and [P3]).

■

The  following  functions  can  be  assigned  to  the 

[EMR], 

[Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3] program-
mable function keys. 
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.

CH UP AND DOWN KEYS  “UP” “DOWN”
➥

 Push to select an operating channel. When [Rotary selec-
tor] selects “operating channel,” this key is disabled.

➥

  Push to select a transmit code channel after pushing [TX 

Code CH Select].

➥

  Push to select a DTMF channel after pushing [DTMF Au-

todial].

➥

  Push to select a scan group after holding down [Scan].

➥

  Push to select the desired application type, individual/talk-

group ID, TX status message and SDM (Short Data Mes-
sage) after pushing [Digital Button].