ICOM 360300 Manual Do Utilizador
– 2 –
– 3 –
Step 4 About the setting screen
q
Open your web browser, then enter the IP address of the
AP-90M into the address bar.
AP-90M into the address bar.
*The default IP address is “
//192.168.0.1/.”
w
Push the [ENTER] key.
• The Login Authentication screen will appear.
e
Enter “admin” (fixed username) and “admin” (default pass-
word) in their respective input fields in the Login Authenti-
cation window, and then click [OK].
word) in their respective input fields in the Login Authenti-
cation window, and then click [OK].
• When accessing the web browser for the first time, setting the
time zone is required. See the “Setting the interface language and
the Time Zone” leaflet for details.
the Time Zone” leaflet for details.
To prevent unauthorized access
You must carefully chose your password, and change
it occasionally. See page 4 of this connection guide for
password setting details.
You must carefully chose your password, and change
it occasionally. See page 4 of this connection guide for
password setting details.
• Choose one that is not easy to guess.
• Use numbers, characters and letters (both lower and upper case).
• Use numbers, characters and letters (both lower and upper case).
About web browsers
We recommend using Microsoft Internet Explorer 9 or
later versions with the AP-90M.
Enable JavaScript
We recommend using Microsoft Internet Explorer 9 or
later versions with the AP-90M.
Enable JavaScript
®
and set to allow Cookies on your web
browser to correctly display the setting screen.
If other browsers are used, the screen may not be
correctly displayed.
If other browsers are used, the screen may not be
correctly displayed.
192.168.0.1/
Enter
q
Enter
w
Click
About the setting screen
• To check the setting screen’s online instructions, place the cursor
on a setting item, and click “?” when it appears.
q
Link to the Icom web site
If your PC is connected to the Internet, click the Icom logo to
open the Icom web site.
open the Icom web site.
w
Setting menu
Displays the screen name list on a menu line. When you
click each menu title, a list of items drops down which you
can use to select the desired setting item.
click each menu title, a list of items drops down which you
can use to select the desired setting item.
e
Setting screen
Displays the settings and values when you click the screen
name.
name.
r
Setting buttons
Save or cancel the setting values.
If “A reboot is required to apply all the new settings” is dis-
played on the screen when you click [Apply], click [Reboot].
The AP-90M reboots, and the setting items and values are
updated.
If “A reboot is required to apply all the new settings” is dis-
played on the screen when you click [Apply], click [Reboot].
The AP-90M reboots, and the setting items and values are
updated.
The above message is displayed on the screen while the
AP-90M is rebooting.
AP-90M is rebooting.
• If the AP-90M is still rebooting, clicking [Back] does not return to the
setting screen. Retry when the rebooting is complete.
• Items and buttons may differ, depending on the setting.
q
w
r
e
Step 3 Connecting and turning ON the power
R
WARNING!
To prevent electrical shock, television interference (TVI),
broadcast interference (BCI) and other problems, ground the
AP-90M through the ground terminal.
NEVER connect the ground terminal to a gas or electric pipe.
This may result in an electrical shock or cause a fire.
broadcast interference (BCI) and other problems, ground the
AP-90M through the ground terminal.
NEVER connect the ground terminal to a gas or electric pipe.
This may result in an electrical shock or cause a fire.
IP address for PC
The AP-90M’s IP address is set to “192.168.0.1”, and DHCP
server to “Disable” as default. Set the connecting PC to
“192.168.0.100”.
See the PC’s instruction manual for the IP address setting
details.
server to “Disable” as default. Set the connecting PC to
“192.168.0.100”.
See the PC’s instruction manual for the IP address setting
details.
AP-90M
WIRELESS A
CCESS POINT
Antenna attachment
Antenna ×2
(Supplied)
(Supplied)
Rotate to
the right
the right
45º
90º
0º
Ground wire
(Purchase separately)
Ground terminal
Power adapter
(Purchase separately)
AC outlet
AP-90M
PC
To the g
round ter
minal
To the DC jac
k
To the [LAN] por
t
LAN cable
(Purchase separately
：Category 5e or higher)
(Example： 192.168.0.100)
（Default： 192.168.0.1)
Cushion sheet
(Supplied)
Hole
Sheet
w
Connect
cables
cables
e
Connecting the
power adapter
power adapter
r
Start the PC
t
Indication check
y
Cushion sheet
attachment
*
2
q
Connect
cables
cables
*1 Indication differs,
depending on the status
depending on the status
*2 Before attaching the
supplied mounting
bracket, first install the
supplied magnets into
the holes.
supplied mounting
bracket, first install the
supplied magnets into
the holes.
*2 Before attaching the
supplied mounting
bracket, first install the
supplied magnets into
the holes.
supplied mounting
bracket, first install the
supplied magnets into
the holes.
Green
Green/Orange*
Green/Orange*
1
Orange
Orange
Orange
[POWER]:
[LAN]:
[LAN]:
[WIRELESS1]:
[WIRELESS2]:
[WIRELESS2]:
For the best performance, attach both antennas.
In case you find difficulties receiving signals,
change the antenna’s direction or its location.
In case you find difficulties receiving signals,
change the antenna’s direction or its location.
Menu
Setting screen
Setting
Title
Default setting
Network Settings
IP Address
IP Address
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
DHCP Server
DHCP Server
DHCP Server
Disable
Wireless Settings Wireless LAN
Wireless LAN
Frequency Band
2.4 GHz (Wireless 1)
*3
5 GHz (Wireless 2)
*3
Bandwidth
20 MHz
Virtual AP
Virtual AP
Interface
ath0 (Wireless 1)
ath4 (Wireless 2)
ath4 (Wireless 2)
SSID
WIRELESSLAN-0
Security
Authentication
Open System/Shared Key
Encryption
None
Management
Administrator
Administrator Password
Username
admin (Cannot be changed)
Current Password
admin (Lower case letters)
About default settings
D
*
3
The wireless LAN unit for Wireless 1 (internal antenna) and Wireless 2 (external antenna).
Wireless 1 and 2’s frequency bands cannot be used when both of them are set to 2.4 GHz or 5 GHz.
The “IEEE802.11ac” standard can only be used when 5 GHz is selected in Wireless 2 (external antenna).
The “IEEE802.11ac” standard can only be used when 5 GHz is selected in Wireless 2 (external antenna).
About the setting screen
The following procedures describe how to use the
AP-90M setting screen using a web browser.
AP-90M setting screen using a web browser.
Step 5 Connecting with wireless LAN
The following procedures describe how to connect to the AP-90M through a wireless LAN, based on Microsoft
®
Windows
®
7.
q
Start the AP-90M, and then turn ON the PC.
w
Click the Wireless Network Connection icon.
• It may take a few minutes until the icon appears.
e
Select the SSID set to the AP-90M and click [Connect].
Then follow the instructions.
Then follow the instructions.
• The SSID is set to “WIRELESSLAN-0” by default.
Click
q
Select
w
Click
Follow the steps (q to y) to connect with the AP-90M, and check the indications as described below.
• If you are connecting the AP-90M with its default settings, disconnect the networks from your PC.
• If [LAN] does not light, check the LAN cable and try again.
• If [LAN] does not light, check the LAN cable and try again.