ICOM 382200 Manual Do Utilizador
40
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Receiving a Test Acknowledgement call
After sending a Test call, the called station will send you a
Test Acknowledgement call.
Push any software key to turn OFF the alarm.
• The received call’s information is displayed.
•
The call is saved in the DSC Log.
L
Push the software key below [EXIT] to return to the operating
screen.
screen.
When a Test Acknowledgement call is received:
• The alarm sounds for 2 minutes.
•
“Received ACK” is displayed.
■ DSC Log
D Received DSC Log
The transceiver saves up to 50 received Distress call
messages and 50 received “Others” call messages in your
messages and 50 received “Others” call messages in your
DSC Log.
On the operating screen, “ ” is displayed when there is an
unread call message.
unread call message.
[MENU] ► “DSC Log”
1.
Display the “DSC Log” screen.
2.
Push [▲] or [▼] to select “Received,” and then push
[ENT].
[ENT].
• The “Received” screen is displayed.
3.
Push [▲] or [▼] to select
“Distress” or “Others,” and then
push [ENT].
push [ENT].
L “Distress” displays the received
Distress call log, and “Others”
displays the received DSC call log.
TIP:
You can also display the “Received” screen by
pushing the software key below
on the operating
screen.
Continued on the next page.