ICOM IC-703 Manual Do Utilizador
68
10
DATA COMMUNICATION
Before operating packet (AFSK) be sure to consult
the operating manual that came with your TNC.
the operating manual that came with your TNC.
qConnect a TNC and PC as left page.
wPush
[
(
Y)
BAND]/[
(
Z)
BAND] to select the desired
band
.
e
P
ush [MODE] momentarily to select SSB (LSB)
mode (or select SSB-D mode).
• After USB mode is selected, push [MODE] for 1 sec.
to toggle between USB and LSB modes.
• After RTTY mode is selected, push [MODE] for 1 sec.
to toggle between RTTY and SSB-D modes.
• Generally, LSB is used on the HF bands and FM is
used for the 50 MHz band.
r Rotate [AF] to set audio to a comfortable listening
level.
t Rotate the main dial to tune a desired signal.
• S-meter indicates received signal strength.
yTransmit your AFSK signals using your computer’s
keyboard.
• The TX indicator lights red.
NOTE: When connecting a TNC to the ACC socket
on the rear panel, select SSB-D mode or discon-
nect the microphone and adjust ‘MIC GAIN’ to 0 in
quick set mode.
on the rear panel, select SSB-D mode or discon-
nect the microphone and adjust ‘MIC GAIN’ to 0 in
quick set mode.
When SSB-D mode is selected, the audio input
from the [MIC] connector is automatically cut, and
the audio input from the [ACC] is used.
from the [MIC] connector is automatically cut, and
the audio input from the [ACC] is used.
R
LSB
CH
VFO A
P
O
S1
5
5
3
7
9
20
40
10
60dB
USB
CW
RTTY AM WFM
M4 1/4
TON
AGC
[TX] indicator [MODE] Main dial
[AF]
[
Y]
[
Z]
“USB” or “LSB” blinks when
SSB-D mode is selected.
SSB-D mode is selected.
■Packet (AFSK) operation
When operating AFSK in SSB mode, the indicated
frequency is the signals carrier point.
• Example— SSB-D mode
Mark freq.: 2125 Hz
Shift freq.: 200 Hz
Shift freq.: 200 Hz
2325 Hz
200 Hz
2125 Hz
Carrier point
(Displayed frequency)
DFrequency indication during AFSK operation
10