ICOM IC-M602 Manual Do Utilizador
41
7
OTHER FUNCTIONS
q Push [F], then push [8 FOG] to enter auto fog horn mode.
w Rotate [CHANNEL] to select the desired fog horn pattern,
w Rotate [CHANNEL] to select the desired fog horn pattern,
push [ENT].
• ‘UNDERWAY,’ ‘STOP,’ ‘SAIL,’ ‘TOW’ are available. (p.40)
• Even [ENT] hasn’t been pushed, the display automatically
• Even [ENT] hasn’t been pushed, the display automatically
changes to the next step after 5 sec. inactivity.
e Rotate [CHANNEL] to adjust the fog horn level, push
[ENT].
• The fog horn level is adjustable in 7 steps.
• Even [ENT] hasn’t been pushed, the display automatically
• Even [ENT] hasn’t been pushed, the display automatically
changes to the next step after 5 sec. inactivity.
r To return to normal operation, repeat step q.
When a DSC call is received, the automatic fog horn func-
tion is interrupted and automatically return to the trans-
ceiver mode. The transceiver’s display indicate
“Receiving DSC calls.” (p 32)
tion is interrupted and automatically return to the trans-
ceiver mode. The transceiver’s display indicate
“Receiving DSC calls.” (p 32)
■ Microphone lock function
The microphone lock function electrically locks the [Y]/[Z]
and [16/9] switches on the supplied microphone. This pre-
vents accidental channel changes and accidental function ac-
cess.
and [16/9] switches on the supplied microphone. This pre-
vents accidental channel changes and accidental function ac-
cess.
➥While pushing [16/9] on the HM-136, turn power ON to tog-
gle the lock function ON and OFF.
BUSY-
25W
---
INT
---CALL
LOCAL--DUP
SCRAM--
TAG
ReceivedCAN
FOG HORN
OUTPUT
UNDERWAY
E<ENT˘OK>
COMMERCIAL
__
_
_
___
BUSY-
25W
---
INT
---CALL
LOCAL--DUP
SCRAM--
TAG
ReceivedCAN
FOG HORN
OUTPUT
<CLR˘Exit>
E
<ENT˘OK> COMMERCIAL
__
_
_
___
BUSY-
25W
---
INT
---CALL
LOCAL--DUP
SCRAM--
TAG
ReceivedCAN
˘UNDERWAY
<
STOP
<CLR˘Exit>
<ENT˘OK> COMMERCIAL