ICOM IC-M602 Manual Do Utilizador

49

9

CONNECTIONS AND MAINTENANCE

An optional MB-75 

FLUSH MOUNT

is available for mounting

the transceiver to a flat surface such as an instrument panel.

KEEP the transceiver and microphone at

least 1 meter away from your vessel’s magnetic navigation
compass.

q Using the attached template, carefully cut a hole into the

instrument panel (or wherever you plan to mount the trans-
ceiver).

w Slide the transceiver through the hole as shown below.

e Attach the 2 supplied bolts (M5 

× 8 mm) on either side of

the IC-M602.

r Attach the clamps on either side of the IC-M602.

• Make sure that the clamps align parallel to the IC-M602’s body.

t Tighten the end bolts on the clamps (rotate clockwise) so

that the clamps press firmly against the inside of the in-
strument control panel.

y Tighten the locking nuts (rotate counterclockwise) so that

the IC-M602 is securely mounted in position as below.

u Connect the antenna and control cable, then return the in-

strument control panel to its original place.