Shanghai Senben Lighting Technology Company 1105B6105B100 Manual Do Utilizador
2 / 3
11. Bulk type terminals make wiring reliable.
12. The light can be installed in pipe suspending type, ceiling type, wall mounting type, guard
12. The light can be installed in pipe suspending type, ceiling type, wall mounting type, guard
pole type and flange pole type. See Figure 2 for installation instructions.
3. Directions
1. In order to ensure the safety service of this Ex light, it shall be installed and maintained by
trained personnel. Unauthorized people shall not open or disassembly the fasteners.
2. Since polyester transparent cover is adopted, there is a waning label: Warning - Potential
electrostatic charge - see Instruction Manual. The installation hight shall no less than 2.5m,
user shall pay attention to the electrostatic charge. Avoid ignition risks caused by normal
service, maintenance and cleaning; do not touch or wipe the light in hazardous areas.
Necessary replacement, wiping and touch shall be carried out in non-hazardous area.
user shall pay attention to the electrostatic charge. Avoid ignition risks caused by normal
service, maintenance and cleaning; do not touch or wipe the light in hazardous areas.
Necessary replacement, wiping and touch shall be carried out in non-hazardous area.
3. Installation and maintenance procedures shall meet associate national standards, do not
operate when energized. Do not open when energized in maintenance or replacement and
waiting for the illuminant to cooldown.
waiting for the illuminant to cooldown.
4. There must be a designated person to in charge of the maintenance work specially.
a) Special operational platform, ladder, safety belt and other necessary equipment shall be
equipped to ensure personnel safety;
b) Inspect the light periodically, any component damage, loss shall be fixed in time;
replace the aged sealing ring or other plastic part to ensure the explosion proof
performance.
performance.
5. Take care of the disassembled components to avoid loss or drop from high cause casualties.
6. Aged sealing rings shall be replaced by one of the same specifications to ensure the
6. Aged sealing rings shall be replaced by one of the same specifications to ensure the
explosion proof performance. See Figure 12 for the detailed specifications.
7. Ensure Do not open when energized is strictly followed, cut off the power if the top cover is
required to open in maintenance.
8. The internal and external earthing shall be reliable.
9. Unauthorized personnel is not allowed to disassemble the light.
10. Do not replace the components or change the structure of the qualified product at will, these
9. Unauthorized personnel is not allowed to disassemble the light.
10. Do not replace the components or change the structure of the qualified product at will, these
activities may affect the explosion proof performance.
11. Protect the flameproof joint from damage or rust, lubricate with 204-1 anti-rust oil.
12. DO NOT OPEN WHEN ENERGIZED!
13. Check the voltage of the power, make sure that it is in the service range of the light to avoid
12. DO NOT OPEN WHEN ENERGIZED!
13. Check the voltage of the power, make sure that it is in the service range of the light to avoid
the light being damaged by improper voltage.