Shanghai Senben Lighting Technology Company 1112611265 Manual Do Utilizador
User manual
FCC ID: 2AA551112611265
For Model: SBD1112-YQL65;
For Model: SBD1112-YQL65;
SBF6112-YQL65;
1. use
Shanghai Senben Lighting Technology Incorporated Company’s SBD1112 SBF6112 Maintenance-
free, Energy-saving,Waterproof, Dustproof and Corrosion-proof Factory Lamp, the light source is
induction lamp, and has the high Luminous Efficiency, longer lifespan etc features, the luminaire
adopts the integrated structure, aluminum alloy die-casted ballast box and incoming line cover with the
surface painted with polyester powder, This product is applicable for the common lighting or
emergency lighting of such indoor and outdoor place with mech dust or damp such as
factory ,airport,tunnel,especially power plant and its boiler unit,iron& steel plant and so on.
induction lamp, and has the high Luminous Efficiency, longer lifespan etc features, the luminaire
adopts the integrated structure, aluminum alloy die-casted ballast box and incoming line cover with the
surface painted with polyester powder, This product is applicable for the common lighting or
emergency lighting of such indoor and outdoor place with mech dust or damp such as
factory ,airport,tunnel,especially power plant and its boiler unit,iron& steel plant and so on.
2.Electrical parameters:
1.Rated Vol.:120VAC 60Hz
2. Applicable Light Source: Induction lamp
2. Applicable Light Source: Induction lamp
3. Rated Power：65W
4. Protection class：IP65 (Close Type)
4. Protection class：IP65 (Close Type)
5. Corrosion proof class：WF2
6. Cable diameter：
G3/4″(Pendant mounting)
7. Applicable Ambient Temperature:
-10℃ to +50℃
8. Size: φ385×470mm
9. Weight: 5.2kgs (Close Type)
3. Directions
1. In order to ensure the safety service of this Ex light, the user should not let any unauthorized
people shall open or assembly the fasteners.
2. There must be a designated person to in charge of the maintenance work specially and inspecting
the light periodically. Special operational platform, ladder, safety belt and other necessary equipment
shall be equipped to ensure personnel safety in the process of installation or maintenance work.
3. Any component damage or loss shall be fixed in time. It’s necessary to replace the aged sealing
ring or other plastic part to ensure the explosion proof performance. In the strong corrosive
environment, users should check the integrity of the Ex lamp at least once every three to six months
and should replace the parts in time when severe corrosion parts are founded.
4. Take care of the disassembled components to avoid loss or drop from high cause casualties.
5. Installation and maintenance procedures shall meet associate national standards, do not operate
when energized. Do not open when energized in maintenance or replacement and waiting for the
illuminant to cooldown.
people shall open or assembly the fasteners.
2. There must be a designated person to in charge of the maintenance work specially and inspecting
the light periodically. Special operational platform, ladder, safety belt and other necessary equipment
shall be equipped to ensure personnel safety in the process of installation or maintenance work.
3. Any component damage or loss shall be fixed in time. It’s necessary to replace the aged sealing
ring or other plastic part to ensure the explosion proof performance. In the strong corrosive
environment, users should check the integrity of the Ex lamp at least once every three to six months
and should replace the parts in time when severe corrosion parts are founded.
4. Take care of the disassembled components to avoid loss or drop from high cause casualties.
5. Installation and maintenance procedures shall meet associate national standards, do not operate
when energized. Do not open when energized in maintenance or replacement and waiting for the
illuminant to cooldown.
4． Warnning：
This equipment is fit fr FCC 18th regulatin.
Any change and modify have not been allowed will case the equipment’s using permission failure
This product may cause radio interference, can not be mounted at the place near marine Safety
communications equipment, and other navigation and communications equipment operating
frequency between 0.45 -30 MHz. If this happen, pls change the output and move the luminaire, and
Any change and modify have not been allowed will case the equipment’s using permission failure
This product may cause radio interference, can not be mounted at the place near marine Safety
communications equipment, and other navigation and communications equipment operating
frequency between 0.45 -30 MHz. If this happen, pls change the output and move the luminaire, and
1
2
3
4
5
6
7
1-Enty wire cavity
2-
electrical
appliance cavity
3-Light source
4-Toughened glass
5-Hooping
6-Reflector
7-Control box cap
Picture 1