Shanghai Senben Lighting Technology Company HUNHE40 Manual Do Utilizador
b)
Inspect the light periodically, any component damage, loss shall be fixed in time; replace the
aged sealing ring or other plastic part to ensure the explosion proof performance.
aged sealing ring or other plastic part to ensure the explosion proof performance.
5.
Take care of the disassembled components to avoid loss or drop from high cause casualties.
6.
Aged sealing rings shall be replaced by one of the same specifications to ensure the explosion proof
performance. See Figure 12 for the detailed specifications.
performance. See Figure 12 for the detailed specifications.
7.
Ensure Do not open when energized is strictly followed, cut off the power if the top cover is required
to open in maintenance.
to open in maintenance.
8.
The internal and external earthing shall be reliable.
9.
Unauthorized personnel is not allowed to disassemble the light.
10. Do not replace the components or change the structure of the qualified product at will, these activities
may affect the explosion proof performance.
11. Protect the flameproof joint from damage or rust, lubricate with 204-1 anti-rust oil.
12. DO NOT OPEN WHEN ENERGIZED!
13. Check the voltage of the power, make sure that it is in the service range of the light to avoid the light
12. DO NOT OPEN WHEN ENERGIZED!
13. Check the voltage of the power, make sure that it is in the service range of the light to avoid the light
being damaged by improper voltage.
4. Warnning:
This equipment is fit fr FCC 18th regulatin.
Any change and modify have not been allowed will case the equipment’s using permission failure
This product may cause radio interference, can not be mounted at the place near marine Safety communications
equipment, and other navigation and communications equipment operating frequency between 0.45 -30 MHz.
If this happen, pls change the output and move the luminaire, and away from other electrical appliances if this
is happening.
Company’s name: Shanghai Senben Lighting Technology Incorporated Company
Add: No.505, Shenyu Road, Malu Town, Jiading Area, Shanghai.
Any change and modify have not been allowed will case the equipment’s using permission failure
This product may cause radio interference, can not be mounted at the place near marine Safety communications
equipment, and other navigation and communications equipment operating frequency between 0.45 -30 MHz.
If this happen, pls change the output and move the luminaire, and away from other electrical appliances if this
is happening.
Company’s name: Shanghai Senben Lighting Technology Incorporated Company
Add: No.505, Shenyu Road, Malu Town, Jiading Area, Shanghai.
This device complies with Part 18 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This product may cause interference to radio equipment and should not be installed
near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.45
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This product may cause interference to radio equipment and should not be installed
near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.45
–30 MHz. If this occurs, please
change outlet or move the lamp far away from other appliance.
(a) The interference potential of device or system:
“Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.”
(2) this device must accept any interference received, including interference that may cause undesired
operation.”