Peerless CMJ455 Folheto
T E C H N I C A L D A T A S H E E T
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessmounts.com
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessmounts.com
page 1 of 1
A R C H I T E C T S S P E C I F I C A T I O N S
The Lightweight Suspended Ceiling Plate shall be a Peerless model CMJ455 and shall be mounted where indicated on the plans. It shall contain
a ceiling tray with a NPS center threaded fitting and a knockout panel for outlet boxes (Raco 445 or Appleton 383 recommended) and antenna
leads. It shall also contain a filler tray. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling
above) with turnbuckles to fine tune the level of the ceiling tray. It shall be U.L. Listed. The finish shall be White Fused Epoxy. Assembly and
installation shall be done according to instructions provided by the manufacturer.
a ceiling tray with a NPS center threaded fitting and a knockout panel for outlet boxes (Raco 445 or Appleton 383 recommended) and antenna
leads. It shall also contain a filler tray. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling
above) with turnbuckles to fine tune the level of the ceiling tray. It shall be U.L. Listed. The finish shall be White Fused Epoxy. Assembly and
installation shall be done according to instructions provided by the manufacturer.
Model: CMJ455
Issued: 05-27-99 Sheet #128-9521-6 09-03-09
Lightweight Suspended Ceiling
Plate for Projector Mounts
The Lightweight Suspended Ceiling Plate for Projector Mounts
consists of an 8"(203mm) x 24"(610mm) filler tray and a
15.75"(400mm) x 24"(610mm) ceiling tray suspended by four tie wires
from the true ceiling above. Turnbuckles allow the installation to be
"fine tuned". The NPS threaded fitting in the ceiling tray serves as the
point of attachment for a Peerless Projector Mount or other Peerless
product specified as compatible with the Lightweight Suspended
Ceiling Kit. Product may be attached directly or lowered with the
addition of a Peerless NPS Extension Column available in several
lengths. 20' (6.1m) of tie wire is provided (18 gauge annealed steel,
soft, black) - enough for a 3' drop suspended ceiling. If the suspended
ceiling is more than 3 feet from the true ceiling, the installer will need
to obtain additional 12 gauge wire prior to installation.
consists of an 8"(203mm) x 24"(610mm) filler tray and a
15.75"(400mm) x 24"(610mm) ceiling tray suspended by four tie wires
from the true ceiling above. Turnbuckles allow the installation to be
"fine tuned". The NPS threaded fitting in the ceiling tray serves as the
point of attachment for a Peerless Projector Mount or other Peerless
product specified as compatible with the Lightweight Suspended
Ceiling Kit. Product may be attached directly or lowered with the
addition of a Peerless NPS Extension Column available in several
lengths. 20' (6.1m) of tie wire is provided (18 gauge annealed steel,
soft, black) - enough for a 3' drop suspended ceiling. If the suspended
ceiling is more than 3 feet from the true ceiling, the installer will need
to obtain additional 12 gauge wire prior to installation.
Features:
•
Five different projector mount attachment points
•
Knockout panel for electrical outlet box (Raco 445
or Appleton 383 recommended) and antenna leads
or Appleton 383 recommended) and antenna leads
•
Scratch-resistant white fused epoxy finish
WARNING: Weight of product not to exceed
maximum load capacity of 50 lbs. (23 kg)!
maximum load capacity of 50 lbs. (23 kg)!
3.25 in.
(83 mm)
3.69 in.
(94 mm)
Electrical Knockout
2.25 in.
(57 mm)
*Combined weight of all attached hardware and components.
Lightweight Suspended Ceiling
Tray for Projector Mounts
Weight
13.6 lb
(6.2 kg)
Shipping
Weight
14.6 lb
(6.6 kg)
15.75”
24”
(400 mm)
(610 mm)
1”
(25 mm)
Width
Depth
Height
*Maximum
Load
50 lb
(23 kg)
8”
24”
(203 mm)
(610 mm)
1”
(25 mm)
Ceiling
Tray
Filler
Tray
Dimensions
H
W
D
H
W
D
Filler Tray
Ceiling Tray
KNOCKOUT
PANEL
ISOMETRIC VIEWS
4 in.
(102 mm)
© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Listed products and must be installed by a
qualified professional installer.