Parle Innovation Inc. DOCPRO Manual Do Utilizador

To angle the Pi Dock-It Pro for ergonomic comfort, with the Pi Dock-It Pro in

laptop-mode, reach underneath the Pi Dock-It Pro and unlatch the kickstand.

Use the Pi Dock-It Pro Kickstand

Charge your Pi Dock-It Pro BT Keyboard

Use Pi Dock-It Pro as an iPad charging stand

Press on the lower left or lower right corner of the Pi Dock-It Pro lid to release the

lid from the frame. Alternatively, place your fingers behind the lower right or left

corner of the Pi Dock-It Pro and press towards you. Once the lid is unlatched, tilt

the Pi Dock-It Pro toward you slightly and rotate / spin the lid 180-degrees until the

front of the Pi Dock-It Pro lid is clicked into laptop mode.

Insert the micro-USB connector of the charging cable provided with the Pi Dock-It

Pro into the charging port. Insert the USB connector into the USB port on the Apple

iPad 10W USB power adapter (supplied with the iPad ).

With your iPad out of the Pi Dock-It Pro case, insert the iPad dock connector

(supplied with the iPad ) into the iPad 30-pin port. Insert the iPad into the Pi

Dock-It Pro by holding the iPad in landscape (horizontal) orientation with the

iPad “Home” button facing toward the left.

Rest the bottom edge of the iPad on the bottom lip the Pi Dock-It Pro lid and

gently tip the iPad back into the lid and press the top two corners of the iPad

until it snaps securely in place. Plug the iPad connector into the iPad ’s 10W USB

power adapter and then into the standard power outlet. Your iPad battery will

charge while resting in the Pi Dock-It Pro in either laptop or tablet mode.

Rotate the iPad housing 180°

to Retuen to Laptop Mode

The Dock-It Pro will Hold the

iPad with Either the iPad Dock

Connector or a Headphone

Jack Plugged into the iPad.

This Allows You to Charge Your iPad

in the Dock-It Pro with the Dock-It Pro

in Laptop or Tablet Modes, or with

the Dock-It Pro Closed.

Plug the Dock-It Pro

Cable into the

micro_USB Port then

Plug the Other End of

the Cable into your

iPad USB Power

Adapter

Reach Behind and

Under the Dock-It Pro

to Extend or Stow the

Kick-Stand