SENWA MEXICO S.A.DE C.V S905TL Manual Do Utilizador
Charging the Battery
Your phone comes with a wall/USB charger (charging head and USB cable) to charge
your phone from any 110/220 VAC outlet.
Note: The battery comes partially charged. you must fully charge the battery before
using your phone for the first time. a fully discharged battery requires up to 4 hours of
charge time. After the first charge, you can use the phone while charging.
using your phone for the first time. a fully discharged battery requires up to 4 hours of
charge time. After the first charge, you can use the phone while charging.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head.
3. Plug the charging head into a standard ac power outlet.
4. When charging is complete, unplug the charging head from the power outlet and
remove the USB cable from the phone.
Turning the Phone On and Off
Turning the Phone On
Press and hold the power/lock key until the your phone vibrates and starts up.
Note: Your phone’s internal antennas are located along the top and bottom of the
phone. do not block the antennas; Doing so may affect call quality or cause the phone
to operate at a higher power level than is necessary.
Turning the Phone Off
1. Press and hold the power/lock key until the phone vibrates, and the device options
menu displays.
2. At the prompt, tap power off.
Roaming
When you travel outside your home network’s coverage area, your phone can use
roaming to acquire service on other compatible digital networks. when roaming, the
roaming icon displays in the status bar. During roaming, some services may not be
available. Depending on your coverage area and service plan, extra charges may apply
when making or receiving calls, connecting to the internet, or using data services.