Vivint. Inc. CP02 Manual Do Utilizador
Configure System Settings: Central Station Settings
- 43 -
Central Station Settings
This section contains descriptions, default values, and notes about the Central Station settings.
To access these settings from the control panel, go to:
To access these settings from the control panel, go to:
Menu > Settings > Installer Toolbox > Central Station
From the Central Station screen, you can view and configure the following settings.
Primary CS IP Address
Displays the primary IP address of the Central Station server.
Secondary CS IP Address
Displays the secondary IP address of the Central Station server.
CS Account Number
The Central Station account number is always eight digits and can include some alpha characters. The Central
Station account number is assigned to the control panel when the panel is registered.
l
Enter eight digits for the Central Station account number.
Enable Two-way Voice
DEFAULT: Stay online for CO and fire
The control panel supports two-way voice communications between the customer and the Central Station
operator over the cellular module after an alarm has been reported.
l
Stay online for CO and fire: The default setting allows two-way voice over the cellular radio only during
CO and fire alarms.
CO and fire alarms.
l
Stay online: Allows two-way voice over the cellular radio.
l
Disabled: Turns off the two-way voice feature.
When the control panel connects with the Central Station operator, it will beep every 6 seconds. The beep
alternates between two tones and indicates the panel is waiting for a session command. If the operator fails to
issue a command within three minutes, the call is terminated. Once the operator presses a command option, the
beeps will stop and a 5-minute audio session will start.
When two-way voice communications have been established, the Central Station operator can use the following
When two-way voice communications have been established, the Central Station operator can use the following
telephone keys to control the communications. Each time the operator uses a command key, the session is
extended for an additional five minutes. During the last minute of communications, the system beeps twice every
15 seconds to indicate that time is running out.
l
Pressing 1 enables Talk Mode one-way communication from the Central Station to the Premises and
allows the operator to talk.
allows the operator to talk.