Cosonic Acoustic Technology Co. Ltd. HXEP310 Manual Do Utilizador

Thanks for the invite. We’ve got some pretty cool friends too, you 

know? Check them out at www.jamaudio.com

Charging the ear buds is so easy you’ve 
probably figured it out by now, but just
in case, you’ve got two options:
your computer or a wall outlet.

1. The cord that came with the ear buds

—the one with the USB on one end and
the Micro USB on the other—will work
with your computer.  

2. 

If you want to use the wall outlet, you’ll 
need to pick up a power cord with a 
Micro USB the next time you’re at the 
store, or use any USB AC adapter, 
including the one for your cell. 

Now go get ready for an epic night while your ear buds do too. 
They need about 3 hours of me time for 6 hours of party time. 

User Manual

Charging Cord

Ear Buds

1.  That’s the power switch.
2.  Push it to play, push it again to pause.
3.  Turn the music up or down. (Wait, why 

do you need to turn it down?)

4.  That light lets you know when 

Bluetooth has the hook-up.

5.  The power cord goes here.
6.  Check out how much juice is in the 

battery.

Like any amazing couple, this one starts with a connection—one between your 
device and the ear bud’s Bluetooth.
Here’s how it works:
1.  We know you’re probably going to think, “derp” with this one, but we have to 

say it: Make sure the smartphone, tablet or computer you want to hook up to 
the ear buds has Bluetooth. (There. We got that out of the way.)

2.  Turn on the ear buds and look for the little blinking light.
3.  Do whatever your device needs you to do on its end. (We don’t know what 

you’re using. We’re not spies.)

4.  Look for TRANSIT BUDS in your device’s Bluetooth list or click 

YES—whatever pops up on your device—and BAM! you’re connected.

5.  Now hit PLAY on your ear buds and crank it up—or down if you’re lame.
You’re probably only going to have to do this once, unless your device goes 
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and 

Bluetooth will find each other every time just as long as the earbuds are set to 

Bluetooth and your device’s Bluetooth is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that end.  
You’ll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code. If 
prompted enter “0000” as the code. 
To clear the pairing history hold the POWER button for 5 seconds.
Note: If you turn on your Transit Ear Buds but haven’t started the party, they 

will automatically power off after 2 minutes of inactivity.   

Flashing RED

Quick Flash BLUE/RED

Slow Flash BLUE

RED (when plugged in)

GREEN (when charging)

Low Battery

Charging 

Ready to Party

Pairing Mode

Connected