Cosonic Acoustic Technology Co. Ltd. NS-CAHBTEB01 Manual Do Utilizador

OFF/ON

Quick Setup Guide |  

NS-CAHBTEB01

• Bluetooth Headset

•  USB charging cable

•  Earbuds (small and large)

•  Quick Setup Guide

•  High-quality stereo sound from Bluetooth 4.0 enabled devices
•  Battery lasts 12 hours (talk), 10 hours (music)
•  Inline controls easily adjust audio
•  Curved design fits comfortably around the neck

Before using your new product, 

please read these instructions to prevent any damage.

A tone sounds (every 60 seconds) and the LED 
flashes red when your headset battery is low.

•  Connect the USB charging cable from your 

headset’s charging port 

to a USB port.

1  Slide the power switch to ON. The LED blinks red 

and blue and the headset enters pairing mode.

2  Make sure that your Bluetooth device is within 
 

33 ft. (10 m) of your headset.

3  Turn on your Bluetooth device, turn on Bluetooth, 

then set your device to pairing mode. For more 
information, see the documentation that came 
with your Bluetooth device.

4  On your Bluetooth device, select 

NS-CAHBTEB01. The LED lights blue and a tone 
sounds when your headset pairs to your 
Bluetooth device.

1  Press and hold  (call) to enter pairing mode. The 

LED blinks red and blue.

2  Make sure that your Bluetooth device is within 
 

33 ft. (10 m) of your headset.

3  Turn on your Bluetooth device, turn on Bluetooth, 

then set your device to pairing mode. For more 
information, see the documentation that came 
with your Bluetooth device.

4  On your Bluetooth device, select 

NS-CAHBTEB01. The LED lights blue and a tone 
sounds when your headset pairs to your 
Bluetooth device.

1  Pair your headset to your secondary Bluetooth 

device first. See "Pairing your first Bluetooth 
device" for instructions.

2   Press and hold  (call) on your Bluetooth headset 

to enter pairing mode.

3   Connect your primary Bluetooth device to your 

Bluetooth headset. See "Manually pairing your 
Bluetooth device" for instructions.

4   Re-pair your secondary Bluetooth device to your 

Bluetooth headset. See "Manually pairing your 
Bluetooth device" for instructions.

 

Note: When connected to two phones, the 
headset calling functions will work with the 
primary phone.

device
Your headset remembers up to six Bluetooth devices 
and will turn off after three minutes if it is not paired 
to a Bluetooth device.

Earbud (L)

Earbud (R)

Call button/LED indicator

Volume down 

Volume up

Charging port

OFF/ON

Power switch

Neck strap 

Play/Pause

Rewind/Skip back

Fast forward/Skip forward

Turn off your headset

Turn on your headset .Your headset 
searches for the last connected
Bluetooth device and reconnects.

OFF/ON

O

Microphone

Final flat size: 304.8 x 177.8 mm 
Final fold size: 76.2 x 177.8 mm

NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai   1   3/12/2015   3:27:50 PM

NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai   1   3/12/2015   3:27:50 PM