Visiplex Inc. CT10X Manual Do Utilizador
Version: 1.00
Software & Programming
The VPS software allows you to program the CT-10x messages and features using an optional USB cable (A Male to Mini B
Male). Follow these steps to install the VPS software and USB drivers:
Note: Do not connect the CT-10x to the PC at this point.
1. Log in to PC as a user with administrator privileges.
2. Download the VPS software (
www.visiplex.com/docs/vps_setup.exe
) and save it to the PC desktop or Downloads folder.
3. Install the VPS software.
4. Install USB drivers applicable to the Windows OS (x86 or x64, i.e. 32-bit or 64-bit) from the shortcuts under the VPS
program group under the Windows start menu.
5. Remove the 4 screw securing the back and front covers. Make sure that battery is installed properly.
6. Identify the COM number on the PC used for communication with the CT-10x:
6.1 Open Windows Device Manager and expand the Port (COM & LPT) section.
Connect the CT-10x to the PC using the USB cable and note the COM number newly assigned to the installed
device on Windows Device Manager. Windows may also display a system notification indicating the installed
COM port in the notification area (next to the system clock).
Note: If the COM number is higher than 16, you will need to re-assign a different COM port to this USB connection.
Right click on the COM port, click on Properties - Port Settings - Advanced. Change the COM Port Number to
a number between 4 and 16 and click OK (you may ignore any warning messages).
device on Windows Device Manager. Windows may also display a system notification indicating the installed
COM port in the notification area (next to the system clock).
Note: If the COM number is higher than 16, you will need to re-assign a different COM port to this USB connection.
Right click on the COM port, click on Properties - Port Settings - Advanced. Change the COM Port Number to
a number between 4 and 16 and click OK (you may ignore any warning messages).
7. Run VPS software and allow it to auto-detect the connected device and serial (COM) port used.
Note: If communication cannot be established or faster connection initialization is preferred, configure the VPS to use
assigned COM port for communication with the device:
assigned COM port for communication with the device:
7.1 Click on the Settings menu.
7.2 Click on the Configuration & Settings menu item.
7.3 In the Serial Port drop down list, select the COM noted on step 6.
7.4 Clear the Auto Detect Connected Devices on Startup check box.
7.5 Click on Save.
8. If connection is successful, the VPS software information bar under the Settings menu will display the connection details
and the CT-1xx programming screen will be displayed.
Note: If the programming screen is not displayed, click on the Wireless Devices toolbar menu and then click on CT-
1xx Compact Transmitter Programmer.
Note: If the programming screen is not displayed, click on the Wireless Devices toolbar menu and then click on CT-
1xx Compact Transmitter Programmer.
9. Click on Read to read the CT-10x parameters. For more information and details regarding each field and feature, press
F1 on your keyboard or click on Help (requires installing the Help support update as shown on step 10).
10. Install the Help support update (for Windows 7 and up):
10.1 Click on the Help menu.
10.2 Click on Help Support Compatibility Download Link and follow instruction on the screen.