Peerless ACC840 Ficha De Dados

Peerless Industries, Inc.
3215 W. North Ave.  Melrose Park, IL 60160
708-865-8870   800-865-2112  Fax 708-865-2941

©2004 Peerless Industries, Inc.  All rights reserved.

Peerless is a registered trademark of Peerless Industries, Inc.

Unistrut

®

 is a registered  trademark of Peerless Industries, Inc.

TECHNICAL DATA SHEET - 

Vibration Absorber Ceiling Mount for Structural Ceilings

 The Vibration Absorber Ceiling Mount for finished or structural ceilings shall be a Peerless model ACC 840 and shall be
mounted where indicated on the plans. It shall use shock absorbing rubber bumpers. It shall mount directly to finished or
structural ceilings using wood mounting screws. It shall feature cord management access holes on ends of mount. It shall be
finished in scratch resistant black fused epoxy. Installation and assembly shall be done in accordance with the instructions
provided by the manufacturer.

1.3” dia.

11.2”

8.8”

CL

C

L

• Shock absorbing rubber bumpers isolate mounting point to

projector from main mounting surface

• Mounts  directly to wood joist finished ceilings, exposed wood

joists or wood beam ceilings only

• Cord management access holes allow cords to run through

the extension column and exit to a power source (note:ACC

800 is needed for Vector Pro

™ 

cord management)

• For use with Peerless Projector mounts

• Accepts Peerless EXT or ADJ 1 1/2” schedule 40 extension

columns

• Scratch resistant black fused epoxy finish

2.7”