Qolsys Inc. QS1100 Manual Do Utilizador
IQ DOOR/WINDOW- INSTALLATION MANUAL
BATTERY REPLACEMENT
To replace batteries:
•
Push tab on side of sensor and lift off cover.
•
Place fingernail or small screwdriver under the battery and gently lift
up. The battery should release easily. Remove old battery. Replace
with a new battery by putting one end under the golden battery
retention clip. Gently push toward the opposite side until the the
battery snaps into place under the black plastic.
with a new battery by putting one end under the golden battery
retention clip. Gently push toward the opposite side until the the
battery snaps into place under the black plastic.
•
Repeat this process for the second battery.
•
Close cover by snapping the cover back onto the sensor.
Push
to
remove
sensor
cover
Tamper
switch
External
contact
header
BaAery
retenJon
clips
3V CR2032 Lithium
(2 batteries per sensor)
5+ years battery life
(2 batteries per sensor)
5+ years battery life
BATTERY TYPE
Operating Temperature: -10C~50C
Relative Humidity: 5-95% Non-Condensing
Storage Temperature: -40-80C
Relative Humidity: 5-95% Non-Condensing
Storage Temperature: -40-80C
ENVIRONMENTAL CHARACTERISTICS
SUPPORT
Sensor: 3.25H x 1.3W x 1D in. (8x3x1.5 cm)
Magnet: 1.3H x 0.435W x 0.312D in. (3.3 x 1.1 x 0.79 cm)
Magnet: 1.3H x 0.435W x 0.312D in. (3.3 x 1.1 x 0.79 cm)
PHYSICAL SPECIFICATIONS
GOT QUESTIONS?
CONTACT TECH SUPPORT
?
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 5 OF 6
© Last revised 2/27/15 All rights reserved