Advance Bright Limited BTS800 Manual Do Utilizador

Clearholic Speaker
Micro USB Cable
3.5mm Aux Cable
User Manual

RED  

Charging

GREEN  

Fully Charged

BT   

 Flashing BLUE  

Pairing Mode

[Pair with 

single 

Clearholic 

BTS800] 

 BLUE  

Connected

Bluetooth Speakers

User Manual

L / R Pairing 

Button

LED 

Indicator
Micro USB 

Power 

Input

Line-in

Power Button

BT   

   

[Pair with 2  

Clearholic  

BTS800]  

After Paired with the Smartphone device
Press L each time to volume DOWN
Press R each time to volume UP
DO NOT HOLD THE L/R BUTTON FOR VOLUME 
UP/DOWN, BECAUSE IT WILL ENTER TO THE 
SEARCHING MODE FOR STEREO FUNCTION

1.Plug the Clearholic BTS800 into your computer 

or USB compatible wall charger via the included 
Micro USB Cable.

2.When the Clearholic BTS800 is fully charged, 

disconnect the cable.

Note: Approximately 3 – 4 hours required for full 

Press “L” on one 

BTS800 and press 

“R” on the other 

one BTS800, 

flashing red LED 

to represent 

linking up with 

another BTS800 

Speaker

Paired between 2 

BTS800 and ready 

for pair with the 

music device

Connected and 

can play for stereo 

mode

Flashing RED 

RED on one 

BTS800 and 

Flashing BLUE on 

the other BTS800

RED on one 

BTS800 and BLUE 

on the other 

BTS800

charge. Battery will last up to 6 hours of 
continuous playback.

1. Press the power button for three seconds to 

turn on the speaker. The BT LED indicator 
blinks blue and the speaker is discoverable 
and ready for pairing.

2. On your Bluetooth music device, turn on 

Bluetooth and scan for devices in its 
Bluetooth menu.

3. When the “Ye!! – BTS800” appears on the 

device list of your device, select “Ye!! – 
BTS800”. The BT LED indicator turns solid 
blue after pairing is established. The speaker 
is now ready to play music.

Power Button

The Clearholic BTS800 speaker is equipped 
with Stereo Pairing feature. To connect two 
Clearholic speakers together with a true left / 
right stereo signal:
1. Press the power button on both BTS800 for 

three seconds to turn on the speakers. The 
BT LED indicators blink red.

2. Press the “L” pairing button from one 

Clearholic speaker and “R” pairing button on 
the other set of speaker for three seconds at 
the same time.

3. The BT LED indicator on one speaker turns 

solid red once the speakers linked up with 
each other and the other speaker keeps 
blink blue.

4. On your Bluetooth music device, turn on 

Bluetooth and scan for devices in its 
Bluetooth menu.

5. When the “Ye!! – BTS800” appears on the 

device list of your device, select “Ye!! – 
BTS800”. The BT LED indicator turns solid 
blue after pairing is established. The 
speakers are now ready to play music in 
stereo mode.

Keep in mind that the Bluetooth Speaker has a 
33 feet range in open field. If you move out of 
range or turn off the Bluetooth feature on your 
Bluetooth device, the Bluetooth Speaker will 
disconnect from your device. To reconnect, 
simply follow the instruction in the “Getting 
Connected” section.

1. Disable the Bluetooth function of your 

Bluetooth device.

2. The Bluetooth Speaker can now be 

connected to the different Bluetooth device.

3. Following the instructions in the “Getting 

Connected” section

Turn on the speaker, connect the Bluetooth 
Speaker and your non-Bluetooth audio device 
via the included 3.5 mm Aux cable. The 
speaker is ready to play music.

Model No.: 

BTS800

Output Power: 

3W + 5W

Input Voltage: 

DC 5V / 1A

Charge Time: 

3 - 4 hours

Input: 

Wireless Bluetooth &  
3.5mm wired auxiliary

Playback Time: 

Up to 6 hours on  

 Bluetooth

Bluetooth Version: 

Bluetooth 3.0 with EDR

Operating Distance:   Up to 33 feet (10 metres)
Dimensions: 

175 x 90 x 75 mm

Weight:  

460 grams

No connection between Bluetooth Speaker 
and your Bluetooth device.
• Make sure the Bluetooth Speaker is fully 

charged

• Make sure the press and hold the power 

button to activate the pairing mode.

• Make sure your Bluetooth device is available 

and supports Bluetooth Advance Audio 

Distribution profile.

• Make sure the Bluetooth Speaker is within 

range of your Bluetooth device.

Audio is not coming out from the Bluetooth 
Speaker after Bluetooth device successfully 
paired.
• Make sure the Bluetooth device volume is set 

to a comfortable listening level.

Audio is not coming out from the Bluetooth 
Speaker after the non-Bluetooth device 
connected with the 3.5 mm Aux cable.
• Make sure the 3.5 mm Aux cable is correctly 

and firmly connected to the Bluetooth 
Speaker and non-Bluetooth device.

• Make sure the non-Bluetooth device is set to 

a comfortable listening level.

1. The radio waves emitted by the Bluetooth 

Speaker and Bluetooth device can affect 
operation of nearby electronics including 
medical devices.

2. Keep the unit in a cool, dry place.

For more information, please visit 
www.yelltowin.com

Designed by Ye!! in Hong Kong
Assembled in China

Computer

(not included)

USB Compatible

Wall charger

(not included)

or

C

M

Y

CM

MY

CY

CMY

K