Peerless ACC558 Folheto
T E C H N I C A L D A T A S H E E T
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
page 1 of 1
A R C H I T E C T S S P E C I F I C A T I O N S
The I-beam Clamp shall be a Peerless model ________ and shall be mounted where indicated on the plans. It shall feature a 4” (102 mm) or
5” (127 mm) adjustment range and a clamping I-beam interface. It shall be constructed primarily of 14 gage cold rolled steel and finished in
black fused epoxy. It shall be UL listed. Assembly and installation shall be done according to the instructions provided by the manufacturer.
5” (127 mm) adjustment range and a clamping I-beam interface. It shall be constructed primarily of 14 gage cold rolled steel and finished in
black fused epoxy. It shall be UL listed. Assembly and installation shall be done according to the instructions provided by the manufacturer.
Models: ACC558, ACC559
Sheet No. 128-9518-1 Issued: 8-20-03
I-Beam Clamps
The I-Beam Clamp is designed to anchor a Peerless
ceiling mount to an overhead I-beam. Two sizes are
available, with a 4” (102 mm) or 5” (127 mm) adjustment
range. The 1 1/2-11.5 NPS threaded fitting is compatible
with Peerless Extension Columns (several models
available, both fixed length and adjustable).
ceiling mount to an overhead I-beam. Two sizes are
available, with a 4” (102 mm) or 5” (127 mm) adjustment
range. The 1 1/2-11.5 NPS threaded fitting is compatible
with Peerless Extension Columns (several models
available, both fixed length and adjustable).
Features:
•
Adjustable Clamping I-beam interface
•
Scratch-resistant black fused epoxy finish
Important:
Architect or installer must verify that the I-beam will safely
support the combined load of all attached hardware and
components.
support the combined load of all attached hardware and
components.
*Shipping weight based on single unit shipment. Per unit shipping weight may be less for bulk orders.
**Combined weight of all attached hardware and components.
I-Beam Clamps
MIN
MAX
4”
8”
(101 mm)
(128 mm)
7”
12”
(128 mm)
(304 mm)
MIN
MAX
.25”
1”
(6 mm)
(25 mm)
.25”
1”
(6 mm)
(25 mm)
A
B
I-BEAM CROSS-SECTION
ISOMETRIC VIEW
SIDE VIEW
**Maximum
Load
250 lb
250 lb
(113 kg)
(113 kg)
Model #
ACC558
ACC559
B
A
© 2003 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
This product must be
installed by a qualified,
professional installer.
installed by a qualified,
professional installer.
R
*Shipping
Weight
4.8 lb
5.3 lb
Weight
4.4 lb
4.8 lb
(2.2 kg)
(2.4 kg)
(2 kg)
(2.2 kg)