MEDTRUM TECHNOLOGIES Inc. FM006 Manual Do Utilizador

Attach the new Patch

1. With one hand hold the Reservoir Patch and pull the needle cap with the other hand. Pull the needle cap in a

quick, straight direction up and away from the Reservoir Patch.

Note: When you remove the needle cap, you will see drops formed at the tip of the needle.

2. Lift the adhesive tab and completely peel off the adhesive liner from the bottom of the Reservoir Patch.

Removing the liner exposes the adhesive.

3. Do NOT touch the adhesive surface. Touching the adhesive surface can reduce the strength of the adhesive.

4. Keep the adhesive pad intact and clean before you place it on the infusion site.

5. Without touching the adhesive pad, press the Reservoir Patch against the skin.