Secuway Inc. IS5000 Manual Do Utilizador
4
4
ii.) User authority
Each of the three main categories of Users has a specific authority.
The basic user can only gain access but cannot conduct any
programming functions. The Manager has access authority, and can
Each of the three main categories of Users has a specific authority.
The basic user can only gain access but cannot conduct any
programming functions. The Manager has access authority, and can
also program with authority that is limited to some functions and to
the corresponding group. For example, a Manager with a position
number 00, can only program for basic Users with position numbers
that fall within the 00-09 range. On the other hand, a Manager with
the corresponding group. For example, a Manager with a position
number 00, can only program for basic Users with position numbers
that fall within the 00-09 range. On the other hand, a Manager with
a position number 50 can only program for basic Users with position
numbers that fall within the 51-59 range.
numbers that fall within the 51-59 range.
iii.) Access
A.) By the use of an ID code: the person who wants to get access will
enter the ID, and press “
,” to unlock. Remember that the Master
and the Manager ID are made up of 7 digits whereas that of the basic
User is made up of 4 to 7 digits.
User is made up of 4 to 7 digits.
B.) By the use of proximity card (IS 5000 RF): the person who wants
to gain access by use of a card will need to touch the antenna area of
the IS-5000 with registered proximity card.
to gain access by use of a card will need to touch the antenna area of
the IS-5000 with registered proximity card.
iv.) Programming
A.) When a person is required to press the “
” button during
programming, the person must make sure that the time it
takes to press it is not more than 1 second, unless the
user guide expressly states that the button should be pressed
for 4 seconds to enter the programming mode.
takes to press it is not more than 1 second, unless the
user guide expressly states that the button should be pressed
for 4 seconds to enter the programming mode.
B.) Programming can be also conducted through computer the
software provided. Please refer to the IS 5000 PC manager
program.
program.
v.) Record keeping
Always keep user ID records for future reference. A separate page for
this has been provided.
this has been provided.
C.) Startup Programming Functions
The following programming functions need to be executed before
proceeding with anything else.
Note: Duplicated ID cannot be registered! ( error sounds
when attempt)