Grace Digital Inc. GDI-EXEJ300 Manual Do Utilizador

Página de 12
AU
D
IO
AU
X
-IN
ON
OFF
OUTPUT
INPUT
Master Power Switch
EcoJam has a separate Master Power 
Switch and a Standby Button. The switch 
MUST be set to the ON position to power 
your EcoJam. Once the switch is set to 
ON, use the Standby Button 
located 
on the top panel to turn the unit On/Off.
NOTE: When not in use for extended 
periods, turn the Master Power off to 
preserve battery life.
IMPORTANT: Standby Power function 
will NOT operate when the Master Power 
is set to OFF.
Back Panel: Functions
Audio AUX-IN
Connect an audio device using the 3.5mm 
cable connection as an alternative to a 
Bluetooth connection to your EcoJam.
NOTE: Volume level must be controlled 
from the audio device when connected to 
the AUX-IN connection.
Input
Connect the USB cable to the USB micro 
Input to charge your EcoJam.
RECOMMENDATION: Use the USB cable 
included in the box.
NOTE: Charge time from low to full 
charge is approximately 3 hours.
While playing audio, EcoJam can be 
charged or charge your device. Battery 
play time shall be reduced depending on 
the time and size of the device charging 
while connected to your EcoJam.
CAUTION: Do NOT charge if unit and/or 
connections are wet or damp.