Peerless CMJ450 Folheto
Suspended Ceiling Plate for Jumbo Mounts
TECHNICAL DATA SHEET
Peerless Industries. Inc.
3215 W. North Ave.
3215 W. North Ave.
phone: (708) 865-8870
Melrose Park, IL 60160
fax: (708) 865-2941
date: 7-25-95
128-9504-5 09-03-09
MODEL CMJ450
WEIGHT: 20.5 LB
SHIPPING WEIGHT: 21.1 LB
The Suspended Ceiling Plate for Jumbo Mounts consists of a 24"(610mm) x 24"(610mm)
ceiling tray suspended by four tie wires from the true ceiling above. A fifth "safety cable" is
also provided. Turnbuckles allow the installation to be "fine tuned". The NPS threaded
fitting in the center of the ceiling tray serves as the point of attachment for a Peerless
Jumbo Mount TV Mount or other Peerless product specified as compatible with the
Suspended Ceiling Kit. Product may be attached directly or lowered with the addition of a
Peerless NPS Extension Column available in several lengths. 20' (6.1m) of tie wire is
provided (12 gauge annealed steel, soft, black) - enough for a 3' drop suspended ceiling.
If the suspended ceiling is more than 3 feet from the true ceiling, the installer will need to
ceiling tray suspended by four tie wires from the true ceiling above. A fifth "safety cable" is
also provided. Turnbuckles allow the installation to be "fine tuned". The NPS threaded
fitting in the center of the ceiling tray serves as the point of attachment for a Peerless
Jumbo Mount TV Mount or other Peerless product specified as compatible with the
Suspended Ceiling Kit. Product may be attached directly or lowered with the addition of a
Peerless NPS Extension Column available in several lengths. 20' (6.1m) of tie wire is
provided (12 gauge annealed steel, soft, black) - enough for a 3' drop suspended ceiling.
If the suspended ceiling is more than 3 feet from the true ceiling, the installer will need to
page 1 of 1
Architects specifications:
The Suspended Ceiling Plate shall be a Peerless model CMJ450 and shall be
mounted where indicated on the plans. It shall contain a ceiling tray with a NPS center
threaded fitting and two knockout panels for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to
transfer the load to four attachment points (in the true ceiling above) with turnbuckles
to fine tune the level of the ceiling tray. A center safety cable shall also be provided. It
shall be U.L. Listed. The finish shall be White Fused Epoxy. Assembly and installa-
tion shall be done according to instructions provided by the manufacturer.
The Suspended Ceiling Plate shall be a Peerless model CMJ450 and shall be
mounted where indicated on the plans. It shall contain a ceiling tray with a NPS center
threaded fitting and two knockout panels for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to
transfer the load to four attachment points (in the true ceiling above) with turnbuckles
to fine tune the level of the ceiling tray. A center safety cable shall also be provided. It
shall be U.L. Listed. The finish shall be White Fused Epoxy. Assembly and installa-
tion shall be done according to instructions provided by the manufacturer.
DETAIL 1
Suspended
Ceiling Runner
Suspended
Ceiling Runner
tie
wire
wire
tie
wire
wire
tie
wire
wire
tie
wire
wire
DETAIL 2
Safety Cable and
Cable Clamp.
Safety Cable and
Cable Clamp.
3.25 in.
83 mm.
83 mm.
3.69 in.
94 mm.
Electrical Knockout
All tie wires attach to the true ceiling above the suspended ceiling.
center
safety
cable
24 in.
610 mm.
610 mm.
24 in.
610 mm.
610 mm.
1.5 in.
38 mm.
38 mm.
DETAIL 3
Hanger Bracket Clamp
and turnbuckle.
Hanger Bracket Clamp
and turnbuckle.
ceiling
tray
tray
hanger
bracket
bracket
turnbuckle
hanger
bracket
clamp
bracket
clamp
runner
MAX
LOAD
CAPACITY
250 LB
WARNING: WEIGHT OF TV or
MONITOR NOT TO EXCEED
MAXIMUM LOAD CAPACITY!
MONITOR NOT TO EXCEED
MAXIMUM LOAD CAPACITY!
2.25 in.
57 mm.
57 mm.
Knockout panels provided
for electrical outlet boxes
(Raco 445 or Appleton
383 recommended) and
antenna leads.
for electrical outlet boxes
(Raco 445 or Appleton
383 recommended) and
antenna leads.
R
© 2003 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.