LEEDARSON LIGHTING CO. LTD. 5AA-GW-ZB-H0 Manual Do Utilizador
Step 1: Please open the gateway upper cover. Connect the power adapter cable
to micro USB port. Connect the RJ45 cable from router to Gateway RJ45 port.
Step 2: Turn on power of both router and gateway. Gateway will get connection to
router upon receiving IP assignment from router automatically.
Step 3: Press pair key(or start searching by app) to launch searching and connecting
those un-pairing devices. Launch searching process before turn on ZLL bulbs.
Step 4: Gateway will open to search and add devices about 1 minute and then close
up searching process. If you press pair key again during the searching period,
Gateway will stop and close the searching process.
Gateway will stop and close the searching process.
Note:
1.
1.
Please refer to the app user guide to down load and install app、register、login、add/delete devices、
control devices、create scenario etc..
2.
Please keep gateway & mobile phone/PAD installed app to connect to the same router with internet
connection during the login in process. Once the login has been completed successfully, you can control all
devices connected to gateway by local control without internet connection.
3.
If you quit the app without logout from system, you can click the app to get previous setting easily for further
control. If you logout from smart home system, please make sure gateway /router with internet connection
during the re-login process.
4.
If you click the app before the gateway in right operating mode(such as power off、not at the same network),
you can not get the previous configuration and setting successfully. Please kill the app task. Make sure
gateway and network in the right mode. And then click app and refresh to start the smart home control again.
GATEWAY set up guide