Ever Poweline 31 - 10kVa/7kW T/PWRLTO-3110K0/00 Manual Do Utilizador
Códigos do produto
T/PWRLTO-3110K0/00
POWERLINE 3-1
10-31, 15-31, 20-31
EVER Sp. z o.o. ul Grudziñskiego 30, 62-020 Swarzêdz
tel. 0048 61 6500 400, fax 0048 61 6510 927, e-mail: ups@ever.com.pl
INPUT SYSTEM/OUTPUT SYSTEM – POWERLINE 15-31 and 120-31 power supply units
POWERLINE 3-1
!
RS 232 COMMUNICATION
Powerline UPS is equipped with RS232 communication port and provided with PowerSoft Personal software. To ensure
correct communication, it is necessary to connect the unit to a free computer port by using a provided communication
cable. After connecting the RS232 cable, start the UPS and the computer and then install software based on the enclosed
manual and messages of the software installer.
correct communication, it is necessary to connect the unit to a free computer port by using a provided communication
cable. After connecting the RS232 cable, start the UPS and the computer and then install software based on the enclosed
manual and messages of the software installer.
CONNECTING THE UPS
The weight of the device should be considered when selecting the location for the installation. The UPS should only be
used in rooms where the dust, temperature, and humidity levels are within the device's specifications. Appropriate cooling
conditions must be ensured for the UPS to work correctly. For this reason, ventilation openings of the UPS must be
uncovered at all times, and the distance between the UPS and other objects should be as recommended. The connected
load must meet the requirements on the wire sizes and the protection systems installed.
used in rooms where the dust, temperature, and humidity levels are within the device's specifications. Appropriate cooling
conditions must be ensured for the UPS to work correctly. For this reason, ventilation openings of the UPS must be
uncovered at all times, and the distance between the UPS and other objects should be as recommended. The connected
load must meet the requirements on the wire sizes and the protection systems installed.
The UPS should be connected by qualified and authorised personnel only. The UPS is completely
disconnected from the power network only when the power supply cord is disconnected.
It is recommended for the protection systems in the building's electric system to be used as one of the measures of
protection. The parameters of the building’s electric wiring system protection should be selected in accordance with the
type and value of the load connected to the wiring system.
protection. The parameters of the building’s electric wiring system protection should be selected in accordance with the
type and value of the load connected to the wiring system.
INPUT SYSTEM/OUTPUT SYSTEM – POWERLINE 10-31 power supply units
The drawing shows the correct way to connect the UPS
1) Power supply line PE wire
2) Power supply line N wire
3) Power supply line L wire
4) Jumper (parallel work option)
5) Output line PE wire
6) Output line N wire
7) Output line L wire
8) Jumper (parallel work option)
1) Power supply line PE protection wire
2) Power supply line neutral N wire
3) Power supply line phase A wire
4) Power supply line phase A wire
5) Power supply line phase C wire
6) Battery positive terminal
7) Battery negative terminal
8) Output line phase L wire
9) Output line neutral N wire
10) Output line protection PE wire
JP1) Jumper (parallel work option)
JP2) Jumper (parallel work option)
2) Power supply line neutral N wire
3) Power supply line phase A wire
4) Power supply line phase A wire
5) Power supply line phase C wire
6) Battery positive terminal
7) Battery negative terminal
8) Output line phase L wire
9) Output line neutral N wire
10) Output line protection PE wire
JP1) Jumper (parallel work option)
JP2) Jumper (parallel work option)