MCNEX CO. LTD 4CH58AP000 Manual Do Utilizador

1. Turn on the engine, and see if the product's power LED(right) is lit.

2. Place the device that has the Qi logo on the middle of the charging 

pad. (Is better to align the device to the center of the pad)

3. The Charge LED starts to light on in red as charging begins.

4. When the charging is finished, the LED will turn green.

• If it is not charging well make sure to align the device to the 

center and recharge.

• Some smartphones or cases do not send the full charging signal to 

wireless charger, in this case, the charge LED will remain in red.