Peerless DCT600 Folheto
T E C H N I C A L D A T A S H E E T
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
page 1 of 1
A R C H I T E C T S S P E C I F I C A T I O N S
The I-beam clamp shall be a Peerless model DCT____ Multi Display I-beam Clamp and shall be mounted where indicated
on the plans. It shall consist of a clamping I-beam interface with an integral decoupler assembly to relieve stress (caused by
side to side or swaying action that may result from minor impacts) from damaging TVs/monitors. It shall be constructed of
heavy gage cold rolled steel and finished in scratch resistant black fused epoxy. It shall be UL Listed. Assembly and installa-
tion shall be done according to the instructions provided by the manufacturer.
on the plans. It shall consist of a clamping I-beam interface with an integral decoupler assembly to relieve stress (caused by
side to side or swaying action that may result from minor impacts) from damaging TVs/monitors. It shall be constructed of
heavy gage cold rolled steel and finished in scratch resistant black fused epoxy. It shall be UL Listed. Assembly and installa-
tion shall be done according to the instructions provided by the manufacturer.
Model: DCT600, DCT700
Issued:01-27-00 Sheet No. 128-9524-2 02-20-02
Heavy Duty I-Beam Clamp
with Decoupler
The Heavy Duty I-Beam Clamp with Decoupler is designed to anchor a
Peerless Multi-Display System to an overhead I-beam. The stub fitting
is compatible with Peerless (ADD model) Adjustable Length Extension
Columns. The built in decoupler absorbs structural vibrations.
Peerless Multi-Display System to an overhead I-beam. The stub fitting
is compatible with Peerless (ADD model) Adjustable Length Extension
Columns. The built in decoupler absorbs structural vibrations.
Features:
•
Adjustable Clamping I-beam interface
•
Decoupler
•
Scratch-resistant black fused epoxy finish
Important:
Architect or installer must verify that the I-beam will safely support
the combined load of all attached hardware and components.
the combined load of all attached hardware and components.
**Combined weight of all attached hardware and components.
I-Beam Clamp with Decoupler
Weight
12.6 lbs.
(5.7 kg)
Shipping
Weight
13.1 lbs.
MIN
MAX
15”
19.5”
(381 mm)
(495 mm)
A
B
I-BEAM CROSS-SECTION
ISOMETRIC VIEW
DECOUPLER
STUB
SIDE VIEW
**Maximum
Load
600 lbs.
(272 kg)
B
A
WARNING: If multi-display system, in combination
with components exceeds 600 lbs. (272 kg) it
therefore exceeds the maximum load. Heavy Duty
I-Beam Clamp with Decoupler will not safely
support a combined load which exceeds 600 lbs.
(272 kg)!
with components exceeds 600 lbs. (272 kg) it
therefore exceeds the maximum load. Heavy Duty
I-Beam Clamp with Decoupler will not safely
support a combined load which exceeds 600 lbs.
(272 kg)!
15”
19.5”
(381 mm)
(495 mm)
2.5”
3”
(64 mm)
(76 mm)
MIN
MAX
1.5”
2”
(38 mm)
(51 mm)
(6 kg)
(6 kg)
(272 kg)
(6.2 kg)
13.1 lbs.
13.6 lbs.
600 lbs.
MODEL #
DCT600
DCT700
5.375”
© 2002 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Peerless is a registered trademark of Peerless Industries, Inc.
This product must be
installed by a qualified,
professional installer.
installed by a qualified,
professional installer.
R