Inotec Limited WDCOCC Manual Do Utilizador
WDC Workplace Data Collector – User Manual
13
4 WDCOCC components
1) WDCOCC components as shown in Figure 3.0
Name
Function
Serial Port
Header
Allows connection to a PC via a suitable USB/RS232
adapter board. This port can be used for WDC
system configuration and system diagnostics.
adapter board. This port can be used for WDC
system configuration and system diagnostics.
Indicator
LEDs
These flash alternately for 10 seconds on power-up
Sensors
PIR and IR sensors used to detect workstation
occupancy
occupancy
Antenna
Used to wirelessly transmit occupancy data to the
host via the Inotec Access Point (AP)
host via the Inotec Access Point (AP)
Programmi
ng Header
For engineering use only. Allows the wireless chip
to be programmed via a suitable Texas Instruments
‘CC Debugger’ cable.
to be programmed via a suitable Texas Instruments
‘CC Debugger’ cable.
Fig. 3 WDC Components