Inotec Limited WDCOCC Manual Do Utilizador
WDC Workplace Data Collector – User Manual
26
8 Installation Instructions
Each WDC has a unique serial number or ‘address’ which is printed on the case
and factory programmed into the non-volatile memory of each unit. This serial
number is wirelessly transmitted along with the occupancy state by each WDC.
and factory programmed into the non-volatile memory of each unit. This serial
number is wirelessly transmitted along with the occupancy state by each WDC.
The serial number consists of four numbers from 0-to–255, separated by a dot For
example: 0.0.0.0 to 255.255.255.255
example: 0.0.0.0 to 255.255.255.255
1) Record the serial number of the WDC fitted to each desk on a printout of the office
floorplan. This will allow the user to relate the occupancy data to specific desks
within the office. An example office plan is shown below with the WDC address for
each desk recorded.
within the office. An example office plan is shown below with the WDC address for
each desk recorded.
To be continued with procedure for checking that transmissions from all units are
being received OK by the host.
being received OK by the host.
Fig. 8 Example Office Layout and WDC Addresses
5.27.0.1
5.27.0.2
5.27.0.3
5.27.0.4
5.27.0.5 5.27.0.6
5.27.0.7
5.27.0.8