BW Broadcast Ltd TX300V2 Manual Do Utilizador
TX V2 FM Broadcast Transmitter
FSK Keyer (Translators)
16
FSK Keyer (Translators)
V2 Transmitters support automatic station identification using frequency shift keying (FSK). FSK sends a user
defined ID for the transmitter using Morse code by shifting the carrier frequency up by 12.5kHz at 20 words per
minute. FSK parameters are set in the RF Settings menu:
defined ID for the transmitter using Morse code by shifting the carrier frequency up by 12.5kHz at 20 words per
minute. FSK parameters are set in the RF Settings menu:
Set the FSK ID by scrolling through the characters using the control wheel (6), save each character by clicking
the control wheel (6) and save the whole ID with the middle button (8). To cancel, press the back button (7).
the control wheel (6) and save the whole ID with the middle button (8). To cancel, press the back button (7).
Audio Processing
BW Broadcast’s range of award winning DSPX audio processors have become known for their features,
performance and value for money. Integrated within all V2 Transmitters is the 4-band DSPXmini. The 14
available factory presets are selectable from either the front panel or the various remote control options. The
processing is bypassed when using an external MPX input to allow for more control when using an external
processor. To set a new preset navigate to:
performance and value for money. Integrated within all V2 Transmitters is the 4-band DSPXmini. The 14
available factory presets are selectable from either the front panel or the various remote control options. The
processing is bypassed when using an external MPX input to allow for more control when using an external
processor. To set a new preset navigate to:
Audio settings → Processing Preset
Each processing preset is loaded live as the user scrolls through the menu allowing for easy comparison
between the different presets.
between the different presets.
A dedicated metering screen indicates the input levels, 4 band automatic gain control and limiters, along with
audio level and MPX level meters.
audio level and MPX level meters.
Remote Control
V2 Transmitters offer many options for remote monitoring and control. All parameters available on the front panel
are available remotely.
are available remotely.
•
HTTP
•
RS232/Serial
•
Telnet
•
SNMP
•
Automatic Email Alerts
Ethernet Settings
The V2 Transmitters have a built in web server which can monitor and control all transmitter parameters remotely
without the need to install any software. The unit can use either static or dynamic IP addressing. All Ethernet
parameters are set in
without the need to install any software. The unit can use either static or dynamic IP addressing. All Ethernet
parameters are set in
System → Ethernet
Here, IP address, Subnet mask, Gateway and two DNS addresses can be assigned for static control, or DHCP
can be enabled for dynamic IP control.
can be enabled for dynamic IP control.
Security
Telnet and http connections are protected by a password. By default user name is admin and the password is
pass.
It is strongly recommended that the user changes this before connecting the device to an Ethernet connection.
If a factory reset is performed on the device, the password will be reset to the default value of pass. The
password is set in:
pass.
It is strongly recommended that the user changes this before connecting the device to an Ethernet connection.
If a factory reset is performed on the device, the password will be reset to the default value of pass. The
password is set in:
System → Users
TX V2
►
►
RF Settings
►
Audio Settings
►
Triggers
►
Alarms
►
System
TX V2►RF Settings
Power 25W
MPX Source
MPX Source
Internal
FSK 1 Hour
FSK ID
FSK ID
ABCD
RF Mute on Silence
1m