ENPING SHENGYI ELECTRONIC CO. LTD. U-5296MM Manual Do Utilizador
BODY-PACK TRANSMITTER
▲ FUNCTION
1/ POWER SWITCH
2/ POWER INDICATOR: Turn on the microphone, the indicator twinkles for a second
means the microphone is working.
If the indicator is lighting means it is in low battery, it reminds you to change the battery.
3/
MIC:
for
connecting
the
suitable
CONDENSER
Clip-Microphone
or
Headset-Microphone.
4/ BATTERY CASE
5/ HEADSET MICROPHONE.
5/ HEADSET MICROPHONE.
▲ OPERATING
1/ Put the BODY-PACK TRANSMITTER on your belt, or GUITAR belt.
2/ Insert the CLIP MICROPHONE, or HEADSET MICROPHONE, or GUITAR cable to
the transmitter.
2/ Insert the CLIP MICROPHONE, or HEADSET MICROPHONE, or GUITAR cable to
the transmitter.
3/ Turn On the transmitter.
4/ Check the RF signal of the receiver , to make sure it receives the signal.
5/ Adjust the volume to suitable place, then you can start playing and singing.
6/ Turn off the power when finish.
Take off the batteries if not using for long time, the waist batteries must be taken to
Recycling Box.
---5---
CONNECTING THE RECEIVER
▲ CONNECTING THE RECEIVEER
1/ Connect the receiver to an amplifier or mixer by using a cable with 3pin XLR, or a
cable with Ø6.35mm connector.
2/ Connect the power adaptor.
Before connecting the power adaptor, make sure the AC voltage is same as it
marks under the power jack. Don put on the power if the voltage is not the
same to avoid danger)
3/ For better result, the receiver must be at least 1m from the ground, transmitter must be
at least 1m from the receiver.
▲ CAUTION
1/ Before connecting the power adaptor, make sure the AC voltage is same as it
marks under the power jack.
2/ Keep the system away from dusty, dirty environment
3/ Keep the system away from wet and raining environment.
----6---