ENPING SHENGYI ELECTRONIC CO. LTD. U-5296MM Manual Do Utilizador
HANDHELD MICROPHONE
▲ Characteristic of HANDHELD microphone
1/ Wind Screen
2/Power Indicator
3/ON/OFF Switch
4/Batter Cover
5/ Batter Case: with 2pcs of 1.5v AA battery
2/Power Indicator
3/ON/OFF Switch
4/Batter Cover
5/ Batter Case: with 2pcs of 1.5v AA battery
▲ Assembling The Battery
1/ Turn the SWITCH to “OFF”, take off the BATTERY CASE COVER in
Anti-clockwise direction.
2/ Put on 2PCS of 1.5V AA battery (
CAUTION: make sure the battery in
right polarity)
3/ Install the BATTERY CASE COVER.
Take off the batteries if not using for long time, the waist batteries must be take
to Recycling Box.
----4---
RECEIVER—front side
1/ POWER SWITCH
2/ VOLUME: CH.A , CH.B
3/ RF indicator: When Transmitters are working, the receiver’s RF light.
4/ AF indicator: The AF lighting when receiving the transmitter’s audio signal.
2/ VOLUME: CH.A , CH.B
3/ RF indicator: When Transmitters are working, the receiver’s RF light.
4/ AF indicator: The AF lighting when receiving the transmitter’s audio signal.
RECEIVER—back side
5/ Antenna
6/ Balanced XRL connector
7/ Mixed AF Output: (for Ø6.35mm connector)
8/ AC power: ( 110/240V, 50Hz)
9/Rack Mount
---3---