Ingenico MOBC150RPA Manual Do Utilizador
This document is the property of Ingenico Inc.
Rev20180802
Its content cannot be reproduced or divulged without the company’s written approval.
5 / 26
1 Introduction
1.1 Safety Notices before Installation or Use
The terminal must be installed following the instructions stated in this manual. Connect the
power cable to the power socket. Make sure that the ground wire of the power socket is connected
to the earth. Avoid sockets that share copying machine, air conditioner and other machine switched
frequently in the same circuit.
Do not use any other adapter. The use of mismatched adapter may damage your terminal.
If the power cable is broken, please stop using it immediately and contact the customer service.
Do not splash any liquid or conductive objects such as pins and wires; otherwise it will cause short
Do not use any other adapter. The use of mismatched adapter may damage your terminal.
If the power cable is broken, please stop using it immediately and contact the customer service.
Do not splash any liquid or conductive objects such as pins and wires; otherwise it will cause short
circuits and damage the terminal.
Do not load or place anything on the terminal.
Do not shake or knock the terminal.
Keep the terminal far from high temperature, dust, moisture and electromagnetic field.
Do not plug in or out any parts or peripherals in charging state. Please turn off the power before
cutting off the power.
Do not use or place flammable aerosols or paint to avoid fire.
Turn off the power immediately once any fault happens. Never try to disassemble and fix the
terminal by yourself, contact our customer service for help if necessary.
Cut off the power supply of the terminal in case of lightning strike in lightning weather.
When the terminal is attacked illegally (e.g. opening the casing), the sensitive information stored
in the terminal will be immediately erased. Please do not open the casing to avoid unnecessary
Do not load or place anything on the terminal.
Do not shake or knock the terminal.
Keep the terminal far from high temperature, dust, moisture and electromagnetic field.
Do not plug in or out any parts or peripherals in charging state. Please turn off the power before
cutting off the power.
Do not use or place flammable aerosols or paint to avoid fire.
Turn off the power immediately once any fault happens. Never try to disassemble and fix the
terminal by yourself, contact our customer service for help if necessary.
Cut off the power supply of the terminal in case of lightning strike in lightning weather.
When the terminal is attacked illegally (e.g. opening the casing), the sensitive information stored
in the terminal will be immediately erased. Please do not open the casing to avoid unnecessary
trouble.
When the terminal is attacked/tampered, there will be obvious alarm information and alarm
sound. Please contact the customer service.
When the terminal is attacked/tampered, there will be obvious alarm information and alarm
sound. Please contact the customer service.