SHENZHEN IP-COM NETWORKS CO. LTD. AP375 Manual Do Utilizador
93
−
The AP reboots when the AP is powered on after a power failure, the QVLAN function is configured, the firmware
is upgraded, an AP configuration is backed up or restored, or the factory settings are restored.
is upgraded, an AP configuration is backed up or restored, or the factory settings are restored.
Log Setup
To access the page, choose Tools > Logs and click the Log Setup tab.
On this page, you can set the number of logs to be displayed and configure log servers.
Setting the Number of Logs to Be Displayed
By default, the AP can display a maximum of 150 logs on the View Logs page. You can change the
number as required.
number as required.
Procedure:
1.
Choose Tools > Logs and click Log Setup.
2.
Change the number of logs as required within the range of 100 to 300.
3.
Click Save.
---End
Configuring Log Server Settings
After you specify a log server, the AP sends its logs to the log server. You can view all the historical
logs of the AP on the log server.
logs of the AP on the log server.