Quanzhou Leixen Electronics Co. Ltd 898UV Manual Do Utilizador
26
or other radio users who have CTCSS or DCS squelch
enabled. You may set Menu 10 as follows:
enabled. You may set Menu 10 as follows:
OFF: Disable. The transmitted signal does not send
any CTCSS or DCS codes.
CTCSS: Transmit a specified CTCSS tone (one of 56
tones)
NDCS: Transmit a specified normal DCS code (one of
107 codes).
IDCS: Transmit a specified inverted DCS code (1 of
107 codes)
Use Menu 11 to set the desired CTCSS or DCS tone,
using the same tables as for Menu 09.
using the same tables as for Menu 09.
FM Radio Function(FM): Menu 12
This transceiver has a built-in FM broadcast receiver.
You may listen to FM radio broadcasts using this
transceiver. To turn the FM broadcast radio on or off.
FM frequency range: 87.5-108MHz.
In VFO / MR / CH mode, press the “M” key, then
press “CHA+/CHA-“ or “VOL+/VOL-” keys to select
Menu 12, then press “M” key to turn on the FM
broadcast radio. To turn off again, follow the same
procedure.
You may listen to FM radio broadcasts using this
transceiver. To turn the FM broadcast radio on or off.
FM frequency range: 87.5-108MHz.
In VFO / MR / CH mode, press the “M” key, then
press “CHA+/CHA-“ or “VOL+/VOL-” keys to select
Menu 12, then press “M” key to turn on the FM
broadcast radio. To turn off again, follow the same
procedure.
Open/Close FM Function