Cellacom incorporation 3396993T161D Manual Do Utilizador
20
Down: Audio player
Left: Write message
Right: FM radio
Auto power on/off: You can set up to power the phone on/off at the set time. This function can be opened or closed.
Restore factory settings: You can recover the phone into the initial setting with this function. By default the password is 1122
3.7.3. Display
Wallpaper: Select your favorite picture as the wallpaper of the standby window.
Screen auto lock: Set the automatic lock screen time.
Idle display settings: On or off display time, on or off display Operator Name, etc.
Keypad backlight time: 20s, 10s, 5s, Night mode, Off.
3.7.4. Security
You can manage your phone safely with this function.
The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The original password of the phone when
leaving the factory is 1122. The password and PIN2 and SIM card are provided by the network operator. When the PIN/PIN2 is input wrongly in successively
three times, the SIM card will be locked.
The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator. If the PUK is input wrongly in
successively 10 times, the SIM card will be locked and discarded permanently.
a) SIM1 security
PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
Change PIN: PIN lock must be enabled, Just can be change.
Change PIN2: input the correct PIN 2. Just can be change.
The SIM2 security setup is same to the SIM1 security setup.
b) Phone locked
Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
c) Modify password the cell phone
You can change the phone password.